Standard: LPS 1175 B3 (SR2) Issue 8, BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013
Secured by Design - Police Preferred Specification
Product Reference: CLD Screenogril S2 Louvred Rigid Panel System
Panel type: Louvre panels consisting of triple flanged horizontal louvres, electrofused at 49mm centers and 4mm vertical wires to rear spaced at 132mm. Top and bottom flat bars 50mm x 3mm. Galvanised and polyester powder-coated to a minimum of 60 microns.
100/0 vision using 69mm x 1.5mm fin louvres
Panel width: 1992mm
Wire diameter: 4mm
Mesh size: n/a
Height: 100/0 vision: 967mm/1608mm/1975mm or any combination of these heights
Nominal height: 2.0 min to 3.0 max– panels can be modified to bespoke heights if required
Finish: Polyester powder-coated to 60-80 microns or 160-200 microns with marine grade and metallics. Any RAL colour available
Top edge projection: nil
Panel installation: Bottom of panel maximum of 50mm above ground Security topping n/a
Posts: RHS or SHS depending on application – please contact CLD Fencing Systems for full details - galvanised after manufacture and polyester powder-coated to match fencing
Post dimensions: Depending upon application
Maximum post Varies dependent on post section Centres:
Fixings: Depending on application – please contact CLD Fencing Systems for full details.
Foundations: Set posts in holes 300mm diameter x 800mm deep (adjust according to fence height), filled not less than half the depth with concrete. Note: contractor/ client is responsible for the foundation size suitable for the ground conditions. Base plate option also available. Please contact CLD for more information.
Warranty: Minimum of 15 years against manufacturing defects.
Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.
Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.
3.7 
