Standard: LPS 1175 A1 (SR1) Issue 8, BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013
Secured by Design - Police Preferred Specification
Product Reference: CLD Screenogril S1 Louvred Rigid Panel System
Panel type: Louvre panels consisting of triple flanged horizontal louvres, electrofused at 49mm centers on 100/2 or 46mm centers on 80/20 and 4mm vertical wires to rear spaced at 132mm. Top and bottom flat bars 50mm x 3mm. Galvanised and polyester powder-coated to a minimum of 60 microns.
2 vision options available – select as required:
80/20 vision using 50mm x 1.5mm fin louvres 100/0 vision using 69mm x 1.5mm fin louvres
Panel width: 1992mm
Wire diameter: 4mm
Mesh size: n/a
Height: 80/20 vision: 954mm/1596mm/1963mm or any combination of these heights
100/0 vision: 967mm/1608mm/1975mm or any combination of these heights
Nominal height: 1.8m min to 3.0m max – panels can be modified to bespoke heights if required.
Finish: Polyester powder-coated to 60-80 microns or 160-200 microns with marine grade and metallics. Any RAL colour available
Top edge projection: nil - flush
Panel installation: Bottom of panel maximum of 50mm above ground Security topping n/a
Posts: Flat bar post, RHS or SHS, depending on application – please contact CLD Fencing Systems for full details - galvanised after manufacture and polyester powder-coated to match fencing
Post dimensions: Depending upon application
Maximum post Varies dependent on post section Centres:
Fixings: Depending on application – please contact CLD Fencing Systems for full details.
Foundations: Set posts in holes 300mm diameter x 800mm deep (adjust according to fence height), filled not less than half the depth with concrete. Note: contractor/ client is responsible for the foundation size suitable for the ground conditions. Base plate option also available. Please contact CLD for more information.
Warranty: Minimum of 15 years against manufacturing defects.
Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.
Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.
3.7 
