ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier

ARDEX VB 100™ is a ready-to-use, one-component, water-based, two-coat system formulated to suppress excessive moisture in concrete.

Key Features

Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
For RH readings up to 100%
For absorbent concrete
No minimum profile required
No priming required prior to installation of ARDEX underlayments
Fast drying – install ARDEX underlayments in as little as 60 minutes after applying the second coat
One-component system
Ready for use*, resealable and reusable
Easy to use and apply
Water-based, Zero VOC
ASTM E96 < .1 perms

*As some settling can occur, stir the ARDEX VB 100 with a wooden paint stirrer or similar prior to use to ensure that all components that have settled are in full suspension. DO NOT MECHANICALLY MIX. DO NOT ADD WATER OR OTHER ADDITIVES!

Opis

Installation
Coverage: Approx. 1125 sq. ft. (27.6 sq. m) per unit at 2 coats
Approx. 225 sq. ft. per gal. (5.5 sq. m per L) at 2 coats (Will vary with concrete surface profile, porosity and texture)
Performance
Effect of 14 pH Solution (ASTM D1308): No effect
Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
Install Underlayment: 1 – 24 hours
VOC: 0 g/L
Packaging: One 5 gal. (19 L) pail
Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
Shelf Life: 1 year, if unopened
Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.
Warranty: ARDEX L.P. Standard Limited Warranty applies.
Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

Specyfikacja techniczna

Nr referencyjnyArdex-vb-100
Rodzina produktuMoisture Control System
Grupa produktuOne Component Moisture Control System
TypObiekt (jeden obiekt)
Data publikacji2024-02-21
Numer edycji1

Linki

Url produktuhttps://www.ardexamericas.com/product/ardex-vb-100/
Opis technicznyhttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2022/12/ARDEX-VB-100-Technical-Data.pdf

Dodatkowe informacje

Materiał głównyCement modyfikowany polimerem

Klasyfikacja

Kategoria BIMobjectPodłogi - Pokrycia i wykończenia
Klasyfikacja IFCFloor
UNSPSC nameFlooring
UNSPSC code301617
Uniclass 2015 CodeEF_30_20
Uniclass 2015 DescriptionFloors
CSI MasterFormat 2014 Code09 60 00
CSI MasterFormat 2014 TitleFlooring
OmniClass Number23-15 17 11
OmniClass TitleFlooring Specialties and Accessories
CSI UniFormat II CodeC3020
CSI UniFormat II TitleFloor Finishes

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze