Opublikuj swoje produkty
ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​
ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​
ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​
ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​
ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​
ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​
ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​
    ARDEX

    ARDEX PC-T™ ​Polished Concrete Topping​​​​​​​​​​​​​​​​​​​​​​

    Self-leveling topping base for floors that will receive a polished concrete surface. Designed for use with ARDEX Polished Concrete Systems.

    Install over the surface of existing concrete to produce a new wear layer.

    Key Features
    • Self-drying
    • Portland cement-based
    • Interior use
    • Pourable and pumpable
    • Available in light gray, gray, and white
    Installation
    • General priming recommendations: EP 2000™ Substrate Preparation Epoxy Primer with sand broadcast; See the ARDEX EP 2000™ technical brochure
    • Packaging: 50 lb (23 kg)
    • Coverage: 16.7 sq. ft. per bag at 3/8” (1.6 m2 at 9.5 mm)
    • Thickness:
      • Neat: 3/8” to 2” (9 mm to 5 cm)
      • Aggregate: up to 5" (13 cm)
    • Flow time: 10 minutes
    • Walkable: 2 to 3 hours
    • Polish: 24 to 72 hours
    Performance
    • ASTM C191 Initial Set: Approx. 10 minutes
    • ASTM C191 Final Set: Approx. 45 minutes
    • ASTM 109 mod (air cure only) Compressive Strength: 6100 psi (427 kg/cm2) at 28 days
    • ASTM C348 Flexural Strength: 1200 psi (84 kg/cm2) at 28 days
    • VOC: 0
    Specyfikacja techniczna
    • Nr referencyjnyardex-pc-t
    • Rodzina produktuPolished Concrete Systems
    • Grupa produktuConcrete Treatments
    • TypObiekt (jeden obiekt)
    • Data publikacji2018-09-07
    • Numer edycji1
    Dodatkowe informacje
    • Zaprojektowano wStany Zjednoczone
    Klasyfikacja
    • Kategoria BIMobjectPodłogi - Pokrycia i wykończenia
    • CSI MasterFormat 2014 Code09 90 00
    • CSI MasterFormat 2014 TitlePainting and Coating
    • OmniClass Number23-15 17 29 11
    • OmniClass TitleIndustrial Floor Coatings

    Dostępny w krajach:

    Ameryka północna Europa Oceania Azja
    Anguilla
    Austria
    Australia
    Chiny
    Antigua i Barbuda
    Czechy
    Singapur
    Aruba
    Dania
    Tajlandia
    Bahamy
    Francja
    Turcja
    Barbados
    Irlandia
    Belize
    Polska
    Bermudy
    Szwecja
    Brytyjskie Wyspy Dziewicze
    Wielka Brytania
    Curaçao
    Włochy
    Dominika
    Dominikana
    Grenada
    Grenlandia
    Gwadelupa
    Gwatemala
    Haiti
    Holandia Karaibska
    Honduras
    Jamajka
    Kajmany
    Kanada
    Kostaryka
    Kuba
    Martynika
    Meksyk
    Montserrat
    Nikaragua
    Panama
    Portoryko
    Saint Kitts i Nevis
    Saint Lucia
    Saint Martin
    Saint Vincent i Grenadyny
    Salwador
    Sint Maarten
    Stany Zjednoczone
    Trynidad i Tobago
    Turks i Caicos
    Wspólnota Saint-Barthélemy
    Wspólnota Terytorialna Saint Pierre i Miquelon
    Wyspy Dziewicze