ARDEX K 520™ Self-Leveling Concrete Toping

ARDEX K 520™ is a self-leveling, topping for fast-track resurfacing, smoothing or leveling of indoor concrete and certain non-porous surfaces. ARDEX K 520 can be installed up to 1″ (25 mm) thick neat and up to 3″ (7.5 cm) thick with the addition of appropriate aggregate (see Technical Data section for minimum installation thicknesses by application).

Key Features

A blend of Portland cement and other hydraulic cements
Resurface indoor concrete and certain non-porous surfaces
Walk on in 2 – 3 hours, seal in as little as 24 hours
Polish in as little as 24 hours
Use for interior floors only

Standards

Tested in accordance with ASTM C1708

Opis

Installation
Mixing Ratio: 5 quarts (4.73 L) of water per 50 lb. (22.7 kg) bag
Coverage: 25 sq. ft. per bag at 1/4” (2.4 sq. m at 6 mm)
16.7 sq. ft. per bag at 3/8″ (1.6 sq. m at 9.5 mm)
12.5 sq. ft. per bag at 1/2” (1.2 sq. m at 12 mm)
Performance
Flow time: 10 minutes
Compressive strength (ASTM C109/mod – air cure only): 6,000 psi (420 kg/sq. cm.) at 28 days
Flexural strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
Walkable: 2 – 3 hours
Min. Cure Time prior to coating: Waterborne: 24 hours
Solvent-borne and 100% solids (less than 20 mils/0.5 mm): 48 hours
High build polymer coating (greater than 20 mils/0.5 mm): 7 days
VOC: 0
Packaging: 50 lb. (22.7 kg) net weight bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf life: Nine months, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.
For complete product technical information, click on the Downloads tab and open the Technical Data download.

Specyfikacja techniczna

Nr referencyjnyARDEX-K-520
Rodzina produktuARDEX Surfaces
Grupa produktuOverlays and Toppings
TypObiekt (jeden obiekt)
Data publikacji2024-02-21
Numer edycji1

Linki

Url produktuhttps://www.ardexamericas.com/product/ardex-k-520/
Instrukcja videohttps://youtu.be/3GhxmUzeoqM
Opis technicznyhttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2018/05/ARDEX-K-520-Technical-Data-1.pdf

Klasyfikacja

Kategoria BIMobjectPodłogi - Podpory
Klasyfikacja IFCFloor
UNSPSC nameCarpet or rug underlays
UNSPSC code30161719
Uniclass 2015 CodePr_35_31_06_80
Uniclass 2015 DescriptionSmoothing and levelling underlay compounds
CSI MasterFormat 2014 Code06 16 26
CSI MasterFormat 2014 TitleUnderlayment
OmniClass Number23-15 17 11 13 11 13
OmniClass TitlePortland Cement Floor Underlayments
CSI UniFormat II CodeB1010
CSI UniFormat II TitleFloor Construction

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze