Model 2500 TESTanDRAIN® - Grooved Single Handle Ball Valve

Model 2500 TESTanDRAIN

2.1 SPRINKLER SPECIALTY PIPE FITTINGS

A. Flow Detection and Test Assemblies:

1. Manufacturers:  Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: 
   1. AGF Manufacturing Inc.; Model 2500 TESTanDRAIN.
   2. <Insert manufacturer's name>.
2. Standard:  UL's "Product iQ" listing or "Approval Guide," published by FM Global, listing.  NFPA 13, 13R, 13D (as applicable).
3. Pressure Rating:  300 psig (2070 kPa).
4. Materials:  Bronze body, brass stem, impregnated Teflon seat, chrome coated brass ball, and a steel handle with positive stops at the TEST and DRAIN positions
5. Components:  A tamper-resistant test orifice, integral tamper-resistant sight glasses, a tapped and plugged port for system access, and a steel identification plate.
6. Test Orifice Size: Nominal [2.8K (3/8 inch), 4.2K (7/16 inch), 5.6K (1/2 inch), 8.0K (17/32) inch, 11.2K (5/8 inch, ELO), 14.0K (3/4 inch, ESFR), K25.2], as required by NFPA 13, latest edition.
7. Inlet and Outlet Size:  [1 inch Grooved] [1-1/4 inch Grooved] [2 inch Groove].
8. Options:
   1. Bypass drain port in the valve body for use with a pressure relief valve and associated drainage piping.
      
      
   2. Locking Plate Kit: Provides vandal resistance and prevents accidental alarm activation by locking the valve handle in the “OFF” position.
      1.  Locking Plate: Carbon steel.
      2. Lock: 1-1/2 inch wide solid brass with a 3/8 inch chrome-plated hardened steel shackle.
      3. For use with a [3/4 inch] [1 inch] [1-1/4 inch] [1-1/2 inch] [2 inch] valve.