VS 65/150 M

Pump for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems. Operating range: from 0,6 a 3,7 m3/h with head of up to 6 metres. Copper piping welded union connectors: Ø 22 mm Ø 28 mm. Working pressure: 10 bar (1000 kPa). Liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.

Tekniset tiedot

Pump for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type. Also suitable for solar power systems. Single body formed of the bronze hydraulic unit. Die-cast aluminium motor casing. Technopolymer impeller. Alumina driving shaft mounted on graphite brushings lubricated by the pumped liquid itself. Stainless steel protective rotor sleeve, stator sleeve and closing flange. Ceramic thrust bearing, E.P.D.M. “O” rings. The two-pole asynchronous motor with wet rotor is selfprotected for resistance. No overload protection required. Operating range: from 0.5 to 3,6 m3/h with head up to 6 metres. Liquid temperature range: from -10°C to +85°C (for sanitary use) +110°C (for others use). Pumped liquid characteristics: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max 30% glycol). Maximum working pressure 10 bar (1000 kPa). Protection level IP 44 Insulation class F Cable grommet PG 11 Installation with motor axis horizontal

Tekniset tiedot

Yksilöity viiteVS-65-150-M
TuoteperheCirculators
TuoteryhmäWet Rotor Electronic Circulators
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2019-08-19
Painoksen numero1

Linkit

Tuotteen urlhttps://www.dabpumps.com/en/products/circulators/wet-rotor-circulators/vs
Asennusohjeethttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60161045.pdf
Tekninen kuvaushttps://www.dabpumps.com/sites/default/files/2016-03/VS_TS_ENG.pdf

Liittyviä

Ensisijainen materiaaliBronze
Toissijainen materiaaliMuovi
Suunniteltu:Italia
Valmistettu:Italia

Luokitus

BIMobject-luokkaPutkityöt - Pumput
UNSPSC-nimiCirculating pumps
UNSPSC-koodi40151504
CSI MasterFormat 2014 -koodi22 35 23
CSI MasterFormat 2014 -nimikeCirculating, Domestic Water Heat Exchangers

Alueellinen saatavuus

Eurooppa
Ahvenanmaa
Alankomaat
Albania
Andorra
Belgia
Bosnia ja Hertsegovina
Bulgaria
Espanja
Färsaaret
Gibraltar
Guernsey
Huippuvuoret
Irlanti
Islanti
Italia
Itävalta
Jersey
Kreikka
Kroatia
Kypros
Latvia
Liechtenstein
Liettua
Luxemburg
Malta
Mansaari
Moldova
Monaco
Montenegro
Norja
Pohjois-Makedonia
Portugali
Puola
Ranska
Romania
Ruotsi
Saksa
San Marino
Serbia
Slovakia
Slovenia
Suomi
Sveitsi
Tanska
Tsekin tasavalta
Ukraina
Unkari
Valko-Venäjä
Vatikaanivaltio
Venäjä
Viro
Yhdistynyt kuningaskunta