BPH/BMH/DPH/DMH

BPH/DPH e BMH/DMH by DAB are wet rotor circulators. They are designed for the circulation of water in civil and commercial conditioning and heating systems. The BPH/DPH (two pole motor) e BMH/DMH (four pole motor) circulator motor shaft can be manually deblock. BPH and BMH are the version with the single motor while BMH e DMH corresponds to the circulators in the twin configuration. Flanged suction and delivery ports. All the models have an air vent plug. The twin version is supplied as standard with an automatic suction type valve incorporated in the delivery port to avoid water recirculating through the unit when it is not running; and a blank flange for servicing either of the two motors.

Tekniset tiedot

APPLICATIONS
Pump for the circulation of water in residential and industrial collective heating and air conditioning systems. All the models are available both in the single and twin version.
CONSTRUCTION FEATURES
Single body consisting of the cast iron hydraulic section, and the wet rotor motor.
Aluminium motor casing. Flanged suction and delivery ports with threaded connectors for control manometers. Technopolymer impeller, tempered stainless steel motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor protection liner and stator liner. Ceramic thrust ring, ethylenepropylene seal rings, and brass air breather plug. Asynchronous four-pole motor for the BMH and DMH versions, two poles for the BPH and DPH versions. The single-phase circulator has been designed for three-speed operation at 230 V, while the three-phase circulator has been designed for two-speed operation at 230 V, and 3-speed operation at 400 V. In both cases, the speed is adjusted through a special selector in the terminal box, in order to adapt the operation of the circulator to the characteristics of the system.
Built-in thermal protection in the single-phase version. For the three-phase version, the motor must be connected to the power input using an external contactor.
The contactor must be connected to the thermal protection built in the motor, in order to protect it from overload at all speeds.
The twin version features an automatic swing check valve incorporated in the delivery port, to avoid water recirculating through the unit when this is not running; in addition, a blank flange is also supplied as standard, to allow either of the two motors to be removed for servicing. The standard execution of the pump body is in PN 10, compatible with PN 6 pumps to ensure interchangeability of the pumps in existing systems.
Circulator protection class: IP 44 for both the single-phase and the three-phase version
Insulation class: H - Cable gland: PG 11
Standard voltage: three-phase 230/400 V, 50 Hz
Product compliant with European Standards EN 60335-2-51

Tekniset tiedot

Yksilöity viiteBPH-BMH-DPH-DMH
TuoteperheCirculators
TuoteryhmäWet Rotor Circulators
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2022-01-11
Painoksen numero1

Linkit

Tuotteen urlhttps://www.dabpumps.com/it/node/2541
Asennusohjeethttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_001359650.pdf
Tekninen kuvaushttps://www.dabpumps.com/sites/default/files/2016-03/BPH_BMH_DPH_DMH_TS_ENG.pdf

Liittyviä

Ensisijainen materiaaliCast iron

Luokitus

BIMobject-luokkaPutkityöt - Pumput
IFC-luokitusPutkiliitin
ETIM-koodiEC010980
ETIM-nimiBuilt-in circulation pump
UNSPSC-nimiCirculating pumps
UNSPSC-koodi40151504
Uniclass 2015 -koodiPr_65_53
Uniclass 2015 -kuvausPump products
CSI MasterFormat 2014 -koodi22 35 23
CSI MasterFormat 2014 -nimikeCirculating, Domestic Water Heat Exchangers
OmniClass-numero23-27 17 00
OmniClass-nimikePumps
CSI UniFormat II -koodiD20
CSI UniFormat II -nimikePLUMBING

Alueellinen saatavuus

Aasia	Pohjois-Amerikka	Afrikka	Etelä-Amerikka	Oseania
Afganistan	Anguilla	Algeria	Argentiina	Amerikan Samoa
Arabiemiirikunnat	Antigua ja Barbuda	Angola	Bolivia	Australia
Armenia	Aruba	Benin	Brasilia	Cooksaaret
Azerbaidžan	Bahamasaaret	Botswana	Chile	Fidzi
Bahrain	Barbados	Burkina Faso	Ecuador	Guam
Bangladesh	Belize	Burundi	Falklandinsaaret (Malvinassaaret)	Kiribati
Bhutan	Bermuda	Djibouti	Guyana	Marshallsaaret
Brittiläinen Intian valtameren alue	Brittiläiset Neitsytsaaret	Egypti	Kolumbia	Mikronesian liittovaltio
Brunei	Caribbean Netherlands	Eritrea	Paraguay	Nauru
Etelä-Korea	Caymansaaret	Etelä-Afrikka	Peru	Niue
Filippiinit	Costa Rica	Etelä-Sudan	Ranskan Guayana	Norfolkinsaari
Georgia	Curaçao	Etiopia	Surinam	Palau
Hong Kong	Dominica	Gabon	Uruguay	Papua-Uusi-Guinea
Indonesia	Dominikaaninen tasavalta	Gambia	Venezuela	Pitcairnsaaret
Intia	El Salvador	Ghana		Pohjois-Mariaanit
Irak	Grenada	Guinea		Ranskan Polynesia
Iran	Grönlanti	Guinea-Bissau		Salomonsaaret
Israel	Guadeloupe	Kamerun		Samoa
Japani	Guatemala	Kap Verde		Timor-Leste
Jemen	Haiti	Kenia		Tokelau
Jordania	Honduras	Keski-Afrikan tasavalta		Tonga
Joulusaari	Jamaika	Komorit		Tuvalu
Kambodža	Kanada	Kongo		United States Minor Outlying Islands
Kazakstan	Kuuba	Kongon demokraattinen tasavalta		Uusi-Kaledonia
Kiina	Martinique	Länsi-Sahara		Uusi-Seelanti
Kirgisia	Meksiko	Lesotho		Vanuatu
Kookossaaret	Montserrat	Liberia		Wallis ja Futuna
Kuwait	Nicaragua	Libya
Laos	Panama	Madagaskar
Libanon	Puerto Rico	Malawi
Macao	Saint Kitts ja Nevis	Mali
Malediivit	Saint Lucia	Marokko
Malesia	Saint Vincent ja Grenadiinit	Mauritania
Mongolia	Saint-Barthélemy	Mauritius
Myanmar (Burma)	Saint-Martin	Mayotte
Nepal	Saint-Pierre ja Miquelon	Mosambik
Oman	Sint Maarten	Namibia
Pakistan	Trinidad ja Tobago	Niger
Palestiinalaisalueet	Turks- ja Caicossaaret	Nigeria
Pohjois-Korea	Yhdysvallat	Norsunluurannikko
Qatar	Yhdysvaltain Neitsytsaaret	Päiväntasaajan Guinea
Saudi-Arabia		Reunion
Singapore		Ruanda
Sri Lanka		Saint Helena
Syyria		Sambia
Tadžikistan		São Tomé ja Príncipe
Taiwan		Senegal
Thaimaa		Seychellit
Turkki		Sierra Leone
Turkmenistan		Somalia
Uzbekistan		Sudan
Vietnam		Swasimaa
		Tansania
		Togo
		Tsad
		Tunisia
		Uganda
		Zimbabwe