Standard: BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013
Product Reference: CLD Dulok WaveTop Double Wired Panel Fencing System
Panel type: Mesh and wire. Single vertical and double horizontal wires. Galvanised and powder-coated to minimum 60 microns.
Panel width: 2506mm
Wire diameter: 6mm verticals and 8mm horizontals or 5mm verticals and 6mm horizontals.
Mesh size: 200 x 50mm
Available heights
Select as required: 630mm to 6060mm. Fence heights above 3030mm are made up of 2 or more panels.
Nominal height: 0.6 to 6m
Finish: Polyester powder-coated to minimum 60 microns.
Any RAL colour including marine grade and metallics.
Top edge projection: nil - flush edges
Panel installation: Bottom of panel minimum 50mm above ground
Security topping
options: Nil
Posts: RHS, galvanised after manufacture and polyester powder-coated to match fencing
Post dimensions: 60mm x 40mm to 120mm x 60mm depending on height of panel
Maximum post
Centres: 2520mm
Fixings: 40mm x 5mm full length clamp bar. M8 x 40mm stainless steel pin hex dome-head security screws. Sheardrive™ if required instead of pin hex.
Foundations: Set posts in holes minimum 300mm diameter x 800mm deep
Note: Contractor/ client is responsible for the foundation size suitable for the ground conditions and fence height.
Warranty: Minimum of 15 years against manufacturing defects.
Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.
Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.
To be read in conjunction with Preliminaries/General conditions
3.7 
