ARDEX K 520™ Self-Leveling Concrete Toping

ARDEX K 520™ is a self-leveling, topping for fast-track resurfacing, smoothing or leveling of indoor concrete and certain non-porous surfaces. ARDEX K 520 can be installed up to 1″ (25 mm) thick neat and up to 3″ (7.5 cm) thick with the addition of appropriate aggregate (see Technical Data section for minimum installation thicknesses by application).

Key Features

A blend of Portland cement and other hydraulic cements
Resurface indoor concrete and certain non-porous surfaces
Walk on in 2 – 3 hours, seal in as little as 24 hours
Polish in as little as 24 hours
Use for interior floors only

Standards

Tested in accordance with ASTM C1708

Tekniset tiedot

Installation
Mixing Ratio: 5 quarts (4.73 L) of water per 50 lb. (22.7 kg) bag
Coverage: 25 sq. ft. per bag at 1/4” (2.4 sq. m at 6 mm)
16.7 sq. ft. per bag at 3/8″ (1.6 sq. m at 9.5 mm)
12.5 sq. ft. per bag at 1/2” (1.2 sq. m at 12 mm)
Performance
Flow time: 10 minutes
Compressive strength (ASTM C109/mod – air cure only): 6,000 psi (420 kg/sq. cm.) at 28 days
Flexural strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
Walkable: 2 – 3 hours
Min. Cure Time prior to coating: Waterborne: 24 hours
Solvent-borne and 100% solids (less than 20 mils/0.5 mm): 48 hours
High build polymer coating (greater than 20 mils/0.5 mm): 7 days
VOC: 0
Packaging: 50 lb. (22.7 kg) net weight bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf life: Nine months, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.
For complete product technical information, click on the Downloads tab and open the Technical Data download.

Tekniset tiedot

Yksilöity viiteARDEX-K-520
TuoteperheARDEX Surfaces
TuoteryhmäOverlays and Toppings
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-02-21
Painoksen numero1

Linkit

Tuotteen urlhttps://www.ardexamericas.com/product/ardex-k-520/
Esittelyvideohttps://youtu.be/3GhxmUzeoqM
Tekninen kuvaushttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2018/05/ARDEX-K-520-Technical-Data-1.pdf

Luokitus

BIMobject-luokkaLattiat - Pohjustus
IFC-luokitusFloor
UNSPSC-nimiCarpet or rug underlays
UNSPSC-koodi30161719
Uniclass 2015 -koodiPr_35_31_06_80
Uniclass 2015 -kuvausSmoothing and levelling underlay compounds
CSI MasterFormat 2014 -koodi06 16 26
CSI MasterFormat 2014 -nimikeUnderlayment
OmniClass-numero23-15 17 11 13 11 13
OmniClass-nimikePortland Cement Floor Underlayments
CSI UniFormat II -koodiB1010
CSI UniFormat II -nimikeFloor Construction

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret