ARDEX K 22 F™ High Flow, Fiber Reinforced, Self-Leveling Underlayment

ARDEX K 22 F™ High Flow, Fiber Reinforced, Self-Leveling Underlayment

Choose Fiber Reinforced
ARDEX K 22 F™ High Flow, Fiber Reinforced, Self-Leveling Underlayment is a blend of high-strength gypsum, Portland cements and powdered polymers used to repair existing above-grade floors prior to the installation of new floor coverings.

Key Features
A blend of high-strength, fiber reinforced gypsum and Portland cements as well as powdered polymers
Use over concrete, gypsum, wood, VCT, existing patching and leveling materials and non-water-soluble adhesive residue on concrete
Use for interior, above-grade floors only
Installs up to 1 1/4″ (3 cm) thick neat and up to 2″ (5 cm) with aggregate
Walkable in 2 – 3 hours
Install floor coverings in as little as 24 hours

Standards
SystemOne
Tested in Accordance with ASTM C1708

Tekniset tiedot

Installation
Mixing Ratio: 4.5 quarts (4.25 L) of water per 50 lb. (22.7 kg) bag
Coverage: 50 sq. ft. per bag at 1/8’’ (4.5 sq. m at 3 mm)
25 sq. ft. per bag at 1/4” (2 sq. m at 6 mm)
Coverage will vary depending on the texture of the surface being smoothed.
Performance
Flow Time: 9 minutes
Compressive Strength (ASTM C109/mod – Air cure only): 6,000 psi (420 kg/sq. cm.) at 28 days
Flexural Strength (ASTM C348): 1,600 psi (112 kg/sq. cm.) at 28 days
Walkable: 2 – 3 hours
Install Flooring: Installation thicknesses of 1/8”: 24 hours
For installation thicknesses greater than 1/8”: When confirmed dry via mat testing (estimated 2 – 3 days)
VOC: 0
Packaging: 50 lb. (22.7 kg) bag
Storage: Store in a cool, dry area. Do not leave bags exposed to sun.
Shelf Life: 1 year, if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies. Also eligible for the ARDEX/HENRY SystemOne™ 10-Year Limited Warranty when used in conjunction with select HENRY® Flooring Adhesives.

Tekniset tiedot

Yksilöity viiteardex-k-22-f
TuoteperheSubfloor Preparation
TuoteryhmäSelf-Leveling Underlayments
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2018-09-07
Painoksen numero1

Linkit

Tuotteen urlhttps://www.ardexamericas.com/product/ardex-k-22-f/
Asennusohjeethttps://www.ardexamericas.com/wp-content/uploads/ARDEX-K-22-F-Technical-Data.pdf
Esittelyvideohttps://youtu.be/QMhFYqSGKa8?list=PLrpgXpCW538Ap7vEfIE5TDnu_0CD5QbGE
Tuotesertifiointihttps://www.ardexamericas.com/wp-content/uploads/Subfloor-Preparation-Self-Leveling-Underlayments-ARDEX-K-22-F-Specification.pdf
Tekninen kuvaushttps://www.ardexamericas.com/wp-content/uploads/ARDEX-K-22-F-Technical-Data.pdf

Liittyviä

Ensisijainen materiaaliLaasti
Suunniteltu:Yhdysvallat

Luokitus

BIMobject-luokkaLattiat - Pohjustus
CSI MasterFormat 2014 -koodi06 16 26
CSI MasterFormat 2014 -nimikeUnderlayment
OmniClass-numero23-15 17 11 13
OmniClass-nimikeFloor Underlayments

Alueellinen saatavuus

Pohjois-Amerikka	Eurooppa
Anguilla	Irlanti
Antigua ja Barbuda	Italia
Aruba	Puola
Bahamasaaret	Ranska
Barbados	Ruotsi
Belize	Saksa
Bermuda	Tanska
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret