发布您的产品
double bench temptation smart twin
double bench temptation smart twin
double bench temptation smart twin
double bench temptation smart twin
double bench temptation smart twin
    sedus

    double bench temptation smart twin

    Teambench Electric height-adjustable double bench for better ergonomics. Flexibility and freedom of design due to an intelligent electrification concept. This is ideally complemented by the electrified temptation storage. The result is fast power and data access and a clean appearance.
    规格
    • Frame system

      The frame system is based on a support beam solution consisting of a central or double support beam and desktop support. The desktop supports ensure a high level of stability, and are also used to hold third level adapters, a CPU holder and laptop holder. The desktop is simply clipped on.

      The frame system for double workstation units provides for a gap of 100 mm. This results in a total depth of 1700 mm for double workstation units with 800 mm deep desktops. When 900 mm deep desktops are used, the total depth of the double workstation unit is 1900 mm. The gap of 100 mm offers many opportunities for the design of the third level.

      Desks with telescopic or crank-operated height adjustment

      The easy-to-assemble frame system for desks that adjust either telescopically or by means of a crank consists of a central support beam with welded desktop supports. It varies according to the width and depth of the desktop. The leg frames are screwed securely to the frame.

      With crank-operated height adjustment the central support beam synchronously transmits the rotation of the crank to both leg frames.

      Desks with motorised height adjustment

      The frame system is based on a support beam solution consisting of a double support beam and welded desktop supports. The motors and control are optimally framed by the double support beams. The optimum connection between the leg frames and frame system is achieved by means of a sturdy screw system with six bushes that ensures the optimum transmission of force to the frame system.

      Leg frames

      Each workstation has a column for height adjustment on each side. The desk columns are connected together by crossbars to form an O-frame. A leg support at the front is not necessary.

      The design of the leg frames as an O-frame gives the user optimum legroom. The leg frames have adjustment glides to balance out uneven floors. A crossbar between the leg frames serves to accommodate the cable tray for the basic electrical connection.

      For a calm appearance, optionally the leg frame can be formed as a panel solution. For this a steel modesty panel is attached between the columns. In addition to the outer modesty panel an inner panel is also available, which allows for vertical cable management via the O-frame.

      The following height adjustment options are available:

      Telescopic height adjustment:

      • 650 – 850 mm continuous
      • Cross section rectangular vertical tube 90 x 50 mm

      Crank-operated height adjustment:

      • 650 – 850 mm continuous
      • Cross section rectangular vertical tube 90 x 50 mm

      Motorised height adjustment (double telescope):

      • 650 – 1250 mm
      • Stroke length 600 mm with double telescope
      • Cross section rectangular vertical tube 100 x 60 mm

      The desks with motorised height adjustment have two control columns, each with a drive. A double workstation unit with motorised height adjustment thus has a total of 4 drives. The motors are contained in steel housings on the outside that are connected to the frame system by means of a screw system with six bushes, and ensure the optimum transmission of force to the frame. The smooth sliding guide ensures that the double telescope runs safely, guaranteeing a high level of stability.

        Substrate

        The desktops are available as 19 mm thick three-layer chipboard with melamine resin finish or veneer.

        The use of three-layer chipboard must be appropriate to the substrate compliant with EN 312-2003.

        Only E1 quality wood materials are used.

        System technology

        Connecting element

        To connect two workstation units a spacer is available. In particular with desks with crank-operated and motorised height adjustment, a minimum gap of 25 mm is left between adjoining surfaces to prevent injuries from crushing or abrasion. The spacer creates a gap of 50 mm. A spacer with preparation for lamp installation is also available. The lamp installation is designed to accommodate Waldmann desk-mounted workplace lights.

        Optionally the spacers can be equipped with cable trays for concealed routing of cables between workstations.

        Add-on options

        Third level

        The third level adapter is attached to the desktop support of the supporting frame. In combination with the U-shaped grommet the third level adapter can be used at any depth.

        The following elements can be attached using the adapter:

        • Functions bridges
        • Privacy screens
        • Workstation lamps
        • Monitor support

        There are many options for the use of privacy screens:

        Privacy screens mounted on leg frames

        The privacy screens are mounted on the common frame base with

        a screw connection. The top edge of the privacy screens are thus

        at a uniform level in the room regardless of the height settings of the desk. To guarantee the entire adjustment range is covered, the following heights are available:

        • 600 mm for telescopic or crank-operated height adjustment (the total height is equal to that of a 3 binder heights storage unit)
        • 800 mm for motorised height adjustment

        Desk-mounted privacy screens

        The desk-mounted privacy screens are attached by means of a system adapter. The desk-mounted privacy screens are available in the heights 350 mm and 500 mm.

        Horizontal cable management

        The cable trays, which fold down on both sides, are attached below the desktop. They have 3- or 4-socket modules to allow electrical connection under the desk. The black cable trays offer easy access when folded down. Clips are optionally available to tie down spare cables in the cable tray and socket module holder.

        Sliding top

        Sliding tops are available for all desk types. On desks with manual and crank-operated height adjustment the desktop pulls forward by 220 mm and on desks with motorised height adjustment by 210 mm. The sliding top thus provides optimum access to the cable channel for electrical connection. When ordering a desk with a sliding top, the fixed cable channel is automatically included. A central locking mechanism guarantees safe closing, and prevents the desktop from accidentally being released.

        Vertical cable management

        For the vertical cable management cable chains are optionally available to run the cables out of sight.

        The following versions are available:

        • Cable chain from floor to basic electrical connection
        • Cable chain from basic electrical connection to personal cable tray
        • Cable chain from floor to personal cable tray

        The cable chains come with cable separation and strain relief. For cable management along the leg frame these can be optionally fitted with an outer and inner panel covering the O-frame..

        Packaging

        Items are supplied in sections for on-site final assembly in order to keep the transport volume as small as possible.

        Quality & ecology

        The desking programme is designed to meet the following requirements:

        • GS test certificate
          • DIN Special Report 147
          • DIN EN 527-1/2/3 Office desks
          • BGI 650
          • EK 5/AK3 (PfG-AF)
          • DIN 4543-1
          • DIN EN 60335
          • DIN, VBG+FAVW, BSO
        • Developed to take into account prEN 527-1:2008
        • PAH confirmation for relevant components
        • “tested for harmful substances” Certificate
        • Quality Office quality seal
        • Quality seal of the Campaign for Healthy Backs (AGR) for desks with motorised height adjustment 650 – 1250 mm

        The processes for manufacture of the products are certified to the following standards:

        • DIN ISO 14001 Environmental management
        • DIN ISO 50001 Energy management
        • DIN ISO 9001
        • EMAS III
      技术规格
      • 唯一参考double-bench-temptation-twin
      • 产品系列Teambench
      • 产品组Electric height-adjustable double bench
      • 类型对象(单个对象)
      • 发布日期2024-10-17
      • 版本号1
      • 高度 (mm)740
      • 宽度 (mm)1600
      • 深度 (mm)1743
      相关
      • 制造国家/地区德国
      分类
      • BIMobject 类别家具 - 椅子、凳子和长凳
      • IFC 分类家具
      • Uniclass 2015 代码Pr_40_50_12_07
      • Uniclass 2015 说明Benches
      • OmniClass 编号23-21 13 00
      • OmniClass 标题Retail and Office Equipment and Furnishings

      发售地区

      欧洲 亚洲 非洲
      丹麦
      不丹
      埃及
      乌克兰
      中国
      俄罗斯
      乌兹别克斯坦
      保加利亚
      也门
      克罗地亚
      亚美尼亚
      冰岛
      以色列
      列支敦士登
      伊拉克
      匈牙利
      伊朗
      北马其顿
      卡塔尔
      卢森堡
      印度
      圣马力诺
      印度尼西亚
      塞尔维亚
      叙利亚
      塞浦路斯
      台湾
      奥兰
      吉尔吉斯斯坦
      奥地利
      哈萨克斯坦
      安道尔
      土库曼斯坦
      希腊
      土耳其
      德国
      圣诞岛
      意大利
      塔吉克斯坦
      拉脱维亚
      大韓
      挪威
      孟加拉国
      捷克共和国
      尼泊尔
      摩尔多瓦
      巴勒斯坦
      摩纳哥
      巴基斯坦
      斯洛伐克
      巴林
      斯洛文尼亚
      文莱达鲁萨兰国
      斯瓦尔巴特群岛
      斯里兰卡
      格恩西岛
      新加坡
      梵蒂冈
      日本
      比利时
      朝鲜
      法国
      柬埔寨
      法罗群岛
      格鲁吉亚
      波兰
      沙特阿拉伯
      波斯尼亚 黑塞哥维那
      泰国
      泽西岛
      澳门
      爱尔兰
      科威特
      爱沙尼亚
      科科斯(基林)群岛
      瑞典
      约旦
      瑞士
      缅甸
      白俄罗斯
      老挝
      直布罗陀
      英属印度洋领地
      立陶宛
      菲律宾
      罗马尼亚
      蒙古
      芬兰
      越南
      英国
      阿塞拜疆
      荷兰
      阿富汗
      葡萄牙
      阿拉伯联合酋长国
      西班牙
      阿曼
      阿尔巴尼亚
      香港
      马恩岛
      马尔代夫
      马耳他
      马来西亚
      黑山
      黎巴嫩