Dimensions and weight
Width: 150 cm
Sitting height: 45 cm
Sitting depth: 75 cm
Ø: 150 cm
Product numbers and combinations
U11-58ERH High Round Bench, half circle
U11-58ERH/2 High Round Bench, 2 half circles
U11-58ERP High Round Planter, half circle
U11-58ERH/2P High Round Bench and Planter, 2 half circles
B11-05 Additional fee for choice of non-standard wood
B11-06 Additional fee for choice of non-standard colour
Append to product number
N för Surface mount.
Standard colours
RAL 6015
RAL 3005
RAL 9005
RAL 5015
Materials and surface treatments
Cumaru
Cumaru is sometimes called Brazilian Teak and is a hard and durable type of wood. The wood changes in a red/brown shade and does not need surface treatment thanks to its natural properties. Over the years Cumaru ages in a beautiful silver gray tone.
Oak
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Steel
Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.
SiOO:X treatment
Sioo:x is a wood protection with environmentally friendly silicon technology. Water-based and biocide-free. We use Sioo mainly for our oak furniture. Sioo:x treatment of is suitable for all woods, outside as well as inside, and gives a light surface without pigments. The surface is UV-resistant, water-repellent and non-stick. Active and preventive action against algae, mould and pests. Also rot-proof, wood-strengthening and fire-retardant. This wood protection provides long durability and easy maintenance. No annual "oiling" is required. Can be painted over. Nola's Sioo:x-treated products are treated twice upon delivery. Once with a wooden protection (Premium Träskydd Altan) and once with a surface protection (Premium Ytskydd Altan). 10-14 months after a product has been installed, it should be treated once more with Sioo:x Premium Surface Protection Altan for best durability. The lifespan after that is estimated to be about 10 years before it needs to be treated again with Premium Surface Protection Altan. The surface protection forms a wear surface, which means that products that are exposed to severe mechanical wear may need to be treated more often than every ten years.
The surface treatment has a tested effect according to the standards EN 46 and EN 113.
For information about the Sioo treatment see the website www.sioox.se.
Wood oil
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
Powder coating
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Electrogalvanized
Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.
Assembly and placement
Freestanding
Freestanding product that is placed directly on the ground.
Surface mount
Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.
Installation in pre-cast foundations
Posts for installation in pre-cast foundations.
Maintenance
Oiled oak
Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil.
SiOO:X treatment
No annual "oiling" is required and the surface treatment can be overpainted. Nola's Sioo:x-treated products are treated twice upon delivery; once with a wood protection (Premium Träskydd Altan) and once with a surface protection (Premium Ytskydd Altan). 10-14 months after a product has been installed, it should be treated once more with Sioo:x Premium Surface Protection Altan for best durability. The lifespan after that is estimated to be about 10 years before it needs to be treated again with Premium Surface Protection Altan. The surface protection forms a wear surface, which means that products that are exposed to severe mechanical wear may need to be treated more often than every ten years. The surface treatment has a tested effect according to the standards EN 46 and EN 113. For information about the Sioo treatment see the website www.sioox.se.
Powdercoated steel
Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.
Download our general maintenance advice