发布您的产品
WCF-PESF - MONT BLANC - Polyester injection anchor

WCF-PESF - MONT BLANC - Polyester injection anchor

WCF-PESF / WCF-PESF-E MONT BLANC for low and medium loads
Polyester is a low to medium performance level, cost effective, general purpose two-component (10:1 ratio), styrene-free chemical anchoring system with unsaturated polyester as chemical base, that has been formulated for anchoring in a wide variety of building materials. Ideal for standard DIY applications in uncracked concrete and masonry substrates.

SUBSTRATES
• Uncracked concrete (option 7) C20/25 to C50/60.
• Reinforced and non-reinforced concrete.
• Dry, wet concrete and flooded holes (Cat 2).
• Masonry substrate.

INSTALLATION TEMPERATURE RANGE
WCF-PESF-410 - for normal installation conditions: 5°C to 30°C
WCF-PESF-E-410 - for summer (tropical) installation conditions: 10°C to 45°C
WCF-PESF-C-410 - for winter installation conditions: -10°C to 30°C

CARTRIDGE SIZE
WCF-PESF-E-300 - 300 ml
WCF-PESF-410 - 410 ml
WCF-PESF-E-410 - 410 ml

APPROVED STEEL ELEMENTS
• Threaded rods M8-M24 made of galvanized steel grades: 5.8, 8.8, 10.9;
• Threaded rods M8-M24 made of stainless steel grades: A2-70, A4-70, A4-80;
• Threaded rods M8-M24 made of HCR steel: 1.4529 and 1.4565;
• Galvanized or hot-dip galvanized rods and thermodiffusion galvanized bars;;

APPLICATIONS
• Anchoring of base plates, brackets, consoles when load-bearing capacity is less critical.
• Fastenings in safety related non-structural applications e.g. handrails, guard rails, canopies, cantilevers, etc.
• DIY anchoring applications into wide variety of building materials e.g. sanitary ware, fencing, gates, boilers, bicycle racks, awnings, etc.
• Design method according to EOTA Technical Report TR029, EN-1992-4:2018 and ETAG 029/Annex C/Design method A.

STYRENE-FREE
Being free of styrene is well suited and safe for use indoors and in confined spaces.

NO STRESS IN SUBSTRATE DURING INSTALLATION
By avoiding mechanical expansion, they do not introduce during installation stress into the substrate and can be installed close to each other and to substrate edges.

FAST CURING
Resin is designed to cure fast so you can load the fastening point earlier.

CONTENT 410 ml - COAXIAL CARTRIDGE
Increased volume - 410 ml for larger work scopes, the coaxial cartridge allows for easier portioning and allows for use of every cm3 of the product.

规格
  • MONT BLANC
    capacity    application temp.
    300 ml    5°C to 30°CWCF-PESF-300
    300 ml    10°C to 45°CWCF-PESF-E-300*
    300 ml    -10°C to 30°CWCF-PESF-C-300
    410 ml    10°C to 45°CWCF-PESF-E-410*

    *product available on request

    Basic parameters

    ParameterValue
    MaterialPolyester resin
    Ambient temperature [˚C]+5 - +30
    ColourGrey
    Curing systemCatalyst
技术规格
  • 唯一参考wcf-pesf-mont-blanc-polyester-injection-anchor-for-low-and-medium-loads
  • 产品系列Anchors
  • 产品组Chemical anchors
  • 类型对象(单个对象)
  • 发布日期2022-05-30
  • 版本号1
相关
  • 设计国家/地区波兰
  • 制造国家/地区波兰
分类
  • BIMobject 类别建筑 - Anchors & Fixings
  • IFC 分类建筑元素代理
  • UNSPSC 名称Structural products
  • UNSPSC 代码301036
  • Uniclass 2015 代码Pr_20_29_03_18
  • Uniclass 2015 说明Chemical anchors
  • CSI MasterFormat 2014 代码05 05 19
  • CSI MasterFormat 2014 标题Post-Installed Concrete Anchors
  • OmniClass 编号23-13 23 11 15 15
  • OmniClass 标题Bonded Anchors
  • CSI UniFormat II 代码E
  • CSI UniFormat II 标题EQUIPMENT & FURNISHINGS

发售地区

欧洲 北美 亚洲
丹麦
加拿大
印度
乌克兰
美国
克罗地亚
匈牙利
奥地利
德国
意大利
捷克共和国
斯洛伐克
斯洛文尼亚
比利时
法国
波兰
波斯尼亚 黑塞哥维那
瑞典
立陶宛
罗马尼亚
英国
荷兰
西班牙