发布您的产品
WCF-E3 - MOUNT EVEREST - Epoxy injection anchor

WCF-E3 - MOUNT EVEREST - Epoxy injection anchor

WCF-E3 MOUNT EVEREST for heavy loads
Pure epoxy two-component 3:1 ratio bonded injection anchor. For professional use in highest load/heavy duty structural anchoring. Offer highest performance for most demanding applications.

SUBSTRATES
• Cracked and uncracked concrete (option 1) C20/25 to C50/60.
• Reinforced and non-reinforced concrete.
• Dry, wet concrete and flooded holes (Cat 2).
• Post-installed rebar connections - calculation in accordance with EC2 EN 1992-1-1.
• Strength class of concrete from C12/15 to C50/60.

INSTALLATION TEMPERATURE RANGE
• 5°C to 40°C

CARTRIDGE SIZE
• 585 ml

APPROVED STEEL ELEMENTS
• Threaded rods M8-M30 made of galvanized steel grades: 4.6, 5.8, 8.8, 10.9;
• Threaded rods M8-M30 made of stainless steel grades: A2-70, A4-70, A4-80;
• Threaded rods M8-M30 made of HCR steel: 1.4529, 1.4565;
• Galvanized or hot-dip galvanized rods and thermodiffusion;
• Rebars: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25, Ø32, grade: B,C;
• Rebars (post installed in accordance with TR023/EC2): Ø8, Ø10, Ø12, Ø14, Ø16, Ø20, Ø25, Ø28, Ø32, class: B, C;

APPLICATIONS
• Anchoring of heavy steel constructions to concrete structural components.
• Anchoring of base plates, brackets, consoles in highest load applications with most challenging conditions.
• Strengthening and reinforcement of concrete members in existing superstructure ( old buildings restoration, bridges renovation, etc.).
• Wide range of post-installed rebar connections including anchorage and overlap joint applications (e.g. slab to slab at support, overlap joint at a foundation of column or wall, etc.).
• Design method according to EN 1992-4:2018 and EC2 EN 1992-1-1.

SEISMIC APPROVAL C1/C2
Anchors have been tested for seismic loads, and thus are approved for use in applications in seismically active areas. Seismic approval allows to design reliable fastenings with increased level of safety.

HIGH LOAD-BEARING PARAMETERS
It is ideally suited for highest load/heavy duty structural anchoring. Offer highest performance for most demanding applications.

STYRENE-FREE
Being free of styrene is well suited and safe for use indoors and in confined spaces.

INSTALLATION IN CRACKED CONCRETE
Approved for fastening threaded rods and rebars in tension zone of reinforced concrete member. Tension zone, also called cracked zone might occur in all main structural concrete members e.g. beams, slabs, columns.

规格
  • MOUNT EVEREST
    capacity    application temp.
    585ml    5°C to 40°C

    Basic parameters

    ParameterValue
    Material
    Epoxy resin
    Ambient temperature [˚C]
    +5 - +40
    Colour
    Pink
    Curing system
    Catalyst
技术规格
  • 唯一参考wcf-e3-mount-everest-epoxy-injection-anchor-for-heavy-loads
  • 产品系列Anchors
  • 产品组Chemical anchors
  • 类型对象(单个对象)
  • 发布日期2022-05-30
  • 版本号1
相关
  • 设计国家/地区波兰
  • 制造国家/地区波兰
分类
  • BIMobject 类别建筑 - Anchors & Fixings
  • IFC 分类建筑元素代理
  • UNSPSC 名称Structural products
  • UNSPSC 代码301036
  • Uniclass 2015 代码Pr_20_29_03_18
  • Uniclass 2015 说明Chemical anchors
  • CSI MasterFormat 2014 代码05 05 19
  • CSI MasterFormat 2014 标题Post-Installed Concrete Anchors
  • OmniClass 编号23-13 23 11 15 15
  • OmniClass 标题Bonded Anchors
  • CSI UniFormat II 代码E
  • CSI UniFormat II 标题EQUIPMENT & FURNISHINGS

发售地区

欧洲 北美 亚洲
丹麦
加拿大
印度
乌克兰
美国
克罗地亚
匈牙利
奥地利
德国
意大利
捷克共和国
斯洛伐克
斯洛文尼亚
比利时
法国
波兰
波斯尼亚 黑塞哥维那
瑞典
立陶宛
罗马尼亚
英国
荷兰
西班牙