发布您的产品
Model 8000 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

Model 8000 Commercial RiserPACK® - Prepackage Commercial Riser Assembly

4.8 out of 5 stars4.8(6 reviews)

The Model 8000 Commercial RiserPACK® is a prepackaged economical riser assembly designed for NFPA 13 wet fire sprinkler systems. The Commercial Model 8000 is available in two different riser styles and seven different size/connection combinations:

Bronze Riser:

  • 1-1/4", 1-1/2", 2" NPT
  • 1-1/2", 2" Groove
  • 1-1/2", 2" NPT x Groove


Schedule 10 Fabricated Steel Riser with Red Powder Coated Finish:

  • 2-1/2", 3", 4", 6", 8" Groove
  • The AGF Manufacturing Inc. Model 8000 Commercial RiserPACK® is a compact prepackaged economical riser assembly designed for NFPA 13 wet fire sprinkler systems.
  • The Model 8000 Commercial RiserPACK® utilizes the appropriate sized UL Listed/FM Approved patented AGF Model 2500 TESTanDRAIN® valves designed to comply with the NFPA 13 requirement regarding providing sight glasses for verification while testing through a properly sized test orifice. The Model 8000 Commercial Riser-PACK® is available with 3/8", 7/16", ½", 17/32", 5/8" (ELO), ¾" (ESFR), and K25 orifices to meet K-Factors of 2.8 to 25.
  • The UL Listed, made and machined in the U.S.A., cast bronze 1¼", 1½" and 2" RiserPACK®s are available with male threaded, grooved, and threaded x grooved ends and are rated at 300 PSI; castings are lettered on both sides allowing right or left side draining, horizontal or vertical installation. The Schedule 40 fabricated steel body with 3mil powder coated red finish 2½", 3", 4", 6", and 8" RiserPACK® is available with grooved ends and is rated at 300 PSI.
  • All RiserPACK®s are assembled with UL Listed/FM Approved AGF Model 7500 300 PSI Pressure Gauge, Model 7600 ¼" 3-way Globe Valve, and either a 1" NPT threaded or saddle mount water flow switch as required by NFPA 13.
  • The Model 8000 Commercial RiserPACK® through the Model 2500 TESTanDRAIN® valves offer a unique design benefit that allows system access through the valve for system integrity testing and/or installation of the optional relief valve trim kit (Model 8011) without system draining.
  • 1¼", 1½", an 2" RiserPACK®s utilize a 1" FNPT M2500 and are available with orifice sizes of 3/8" to 5/8" (ELO); 2½" and 3" RiserPACK®s utilize a 1¼" FNPT M2500 or 2511 and are available with orifice sizes of 3/8" to ¾" (ESFR); and 4" and 6" RiserPACK®s utilize a 2" Grooved M2500 is available with orifice sizes of 3/8" to K-25.


Made in USA

规格
  • 2.1 SPRINKLER SPECIALTY PIPE FITTINGS - Flow Detection and Test Assemblies:

    Product:  Commercial Model M8000. Includes a flow switch, TESTanDRAIN Model 2500, Model 7600 3-way Globe Valve, and a M7500 Pressure Gauge.

    ** NOTE TO SPECIFIER **  Delete riser model not required.

    1. Riser Model:  Pre-Assembled TESTanDRAIN Riser 1-1/4, 1-1/2. and 2 inches (32 mm, 38 mm, 51 mm):
      1. One-piece bronze casting, lettered on both sides allowing right or left side draining, horizontal or vertical installation.
      2. Inlet and Outlet (Cast bronze): ** NOTE TO SPECIFIER **  Delete inlet and outlet size not required.
        1. Inlet and Outlet:  Threaded.
        2. Inlet and Outlet:  Grooved 1-1/2 to 2 inches (38 mm to 51 mm).
        3. Inlet and Outlet:  Threaded and Grooved 1-1/2 to 2 inches (38 mm to 51 mm).
      3. Standard: UL's "Product iQ" listing, or "Approval Guide," published by FM Global, listing. NFPA 13.
      4. Pressure Rating: 300 psig (2070 kPa).
      5. Size: Same as connected piping.
    2. Riser Model: Pre-Assembled TESTanDRAIN Riser 2-1/2, 3, 4, 6, and 8 inch:
      1. Schedule 10 fabricated steel body with 3mil powder-coated red finish.
      2. Inlet and Outlet (Schedule 40 steel).
        1. Inlet and Outlet: Grooved 2-1/2, 3, 4, 6, and 8 inches (64 mm, 76 mm, 102 mm, 152 mm) Models.
      3. Standard: UL's "Product iQ" listing, or "Approval Guide," published by FM Global, listing. NFPA 13.
      4. Pressure Rating: 300 psig (2070 kPa).
      5. Size: Same as connected piping.
    3. Valve Model 2500 TESTanDRAIN valve 1-1/4, 1-1/2, and 2 inch Models:** NOTE TO SPECIFIER ** Delete valve model not required.
      1. 1 inch (25 mm) FNPT. ** NOTE TO SPECIFIER ** Delete orifice size not required.
        1. Test Orifice Size: Nominal 2.8K (3/8 inch), as required by NFPA 13, latest edition.
        2. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
        3. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
        4. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
        5. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
    4. Valve Model 2500 TESTanDRAIN valve 2-1/2 and 3 inches Models:
      1. 1 inch (25 mm) FNPT. ** NOTE TO SPECIFIER ** Delete orifice size not required.
      2. Test Orifice Size: Nominal 2.8K (3/8 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      6. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
      7. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
      8. Test Orifice Size: Nominal K25.2, as required by NFPA 13, latest edition.
    5. Valve Model 2500 TESTanDRAIN valve 4, 6, and 8 inches Models:
      1. 2 inches (51 mm) Grooved. ** NOTE TO SPECIFIER ** Delete orifice size not required.
      2. Test Orifice Size: Nominal 2.8K (3/8 inch), as required by NFPA 13, latest edition.
      3. Test Orifice Size: Nominal 4.2K (7/16 inch), as required by NFPA 13, latest edition.
      4. Test Orifice Size: Nominal 5.6K (1/2 inch), as required by NFPA 13, latest edition.
      5. Test Orifice Size: Nominal 8.0K (17/32 inch), as required by NFPA 13, latest edition.
      6. Test Orifice Size: Nominal 11.2K (5/8 inch, ELO), as required by NFPA 13, latest edition.
      7. Test Orifice Size: Nominal 14.0K (3/4 inch, ESFR), as required by NFPA 13, latest edition.
      8. Test Orifice Size: Nominal K25.2, as required by NFPA 13, latest edition.
      9. Water flow alarm switch.
      10. Pressure Gauge: AGF Model 7500.
      11. 1/4 inch (6 mm), 3-way globe valve: AGF Model 7600.
技术规格
  • 唯一参考agf-model-8000com
  • 产品系列AGF Fire Sprinkler Products
  • 产品组RiserPACK®
  • 类型对象(单个对象)
  • 发布日期2019-10-18
  • 版本号1
相关
  • 主材料Bronze
  • 次要材料碳钢
  • 设计国家/地区美国
  • 制造国家/地区美国
分类
  • BIMobject 类别消防产品 - 洒水系统
  • IFC 分类阀门
  • UNSPSC 名称Valves
  • UNSPSC 代码401416
  • Uniclass 2015 代码Pr_65_54
  • Uniclass 2015 说明Valve products
  • CSI MasterFormat 2014 代码23 09 13.33
  • CSI MasterFormat 2014 标题Control Valves
  • OmniClass 编号23-27 31 00
  • OmniClass 标题Valves

发售地区

亚洲 欧洲 非洲 南美洲 大洋洲 北美
不丹
丹麦
中非共和国
乌拉圭
东帝汶
伯利兹
中国
乌克兰
乌干达
厄瓜多尔
巴布亚新几内亚
加拿大
乌兹别克斯坦
俄罗斯
冈比亚
哥伦比亚
所罗门群岛
危地马拉
也门
保加利亚
几内亚
圭亚那
斐济
古巴
亚美尼亚
克罗地亚
几内亚比索
委内瑞拉
新喀里多尼亚
哥斯达黎加
以色列
冰岛
刚果
巴拉圭
新西兰
多米尼加共和国
伊拉克
匈牙利
刚果民主共和国
巴西
澳大利亚
尼加拉瓜
伊朗
北马其顿
利比亚
智利
瓦努阿图
巴哈马
卡塔尔
卢森堡
利比里亚
法属圭亚那
巴拿马
印度
塞尔维亚
加纳
玻利维亚
格陵兰岛
印度尼西亚
塞浦路斯
加蓬
福克兰群岛(即马尔维纳斯群岛)
波多黎各
叙利亚
奥地利
南苏丹
秘鲁
洪都拉斯
台湾
希腊
南非
苏里南
海地
吉尔吉斯斯坦
德国
博茨瓦纳
阿根廷
牙买加
哈萨克斯坦
意大利
卢旺达
美国
土库曼斯坦
拉脱维亚
厄立特里亚
萨尔瓦多
土耳其
挪威
吉布提
墨西哥
塔吉克斯坦
捷克共和国
喀麦隆
大韓
摩尔多瓦
坦桑尼亚
孟加拉国
斯洛伐克
埃及
尼泊尔
斯洛文尼亚
埃塞俄比亚
巴勒斯坦
斯瓦尔巴特群岛
塞内加尔
巴基斯坦
比利时
塞拉利昂
斯里兰卡
法国
多哥
日本
波兰
安哥拉
朝鲜
波斯尼亚 黑塞哥维那
尼日利亚
柬埔寨
爱尔兰
尼日尔
格鲁吉亚
爱沙尼亚
布基纳法索
沙特阿拉伯
瑞典
布隆迪
泰国
瑞士
摩洛哥
科威特
白俄罗斯
斯威士兰
约旦
立陶宛
查德
缅甸
罗马尼亚
毛里塔尼亚
老挝
芬兰
津巴布韦
菲律宾
英国
科特迪瓦
蒙古
荷兰
突尼斯
越南
葡萄牙
索马里
阿塞拜疆
西班牙
纳米比亚
阿富汗
阿尔巴尼亚
肯尼亚
阿拉伯联合酋长国
黑山
苏丹
阿曼
莫桑比克
马来西亚
莱索托
黎巴嫩
西撒哈拉
贝宁
赞比亚
赤道几内亚
阿尔及利亚
马拉维
马达加斯加岛
马里