HIPPO

Product Specification

Submersible centrifugal pump, spiral body, single stage, semi-open radial flow impeller, flanged discharge, bearing-mounted, shaft sealing through double mechanical seal.

General Applications

The HIPPO Series was developed to pump water with suspended solids in industrial, agricultural, water supply, and municipal sanitation applications.

- Lift stations

- Effluent treatment stations

- Drainage of wastewater and rainwater

Constructive Features

- Flanged outlet according to ASME B 16.5 and DIN 2532 standards

- Casing made of gray cast iron GG-25

- Semi-open impeller made of nodular cast iron GGG-50

- Bottom plate made of gray cast iron GG-25

- Double mechanical seal in AISI-304 stainless steel, Buna N, Silicon carbide (SiC/SiC), and Graphite/Ceramic

- Moisture sensor in the oil chamber

- Thermal protection

- IE3 IP-68 electric motor, 4 poles, 60Hz, class H insulation, AISI-420 stainless steel shaft

- Lifting handle in 304 stainless steel

- Cable length: 10 m

- O-ring seals: Buna (NBR)

Technical Specifications

- Maximum liquid temperature: 40°C

- Maximum submersion depth: 20 m

- Installation in a wet well

- Spherical solid passage of 65 mm for the HIPPO 4NH series and 76 mm for the HIPPO 6NF series

Optional Features

- Double mechanical seal in AISI-304 stainless steel, Buna N, Tungsten (Tung/Tung), and Graphite/Ceramic

- Cable length: 25 m

- Moisture sensor in the motor chamber

- PT100 thermal sensor

- Abrasion-resistant coating

Important

- Do not handle the pump with the motor powered: risk of electric shock

- Not suitable for pumping potable water

- For use outside the specified applications, consult the manufacturer

- Refer to the Instruction Manual for additional operational precautions