Sediment Filtration System - Skid - LFSKID-4XLP-1

The LiquiTech® Sediment Filtration System removes sediment from your water that can damage pipes and other water-bearing equipment, degrade water quality, and encourage bacteria growth. With self-cleaning stainless-steel filters and a smart control system, our Sediment Filtration System is durable, sustainable, cost-effective, and water-efficient.

1 ABW4XLP Filter 4IN Pipe

Benefits

• Improved water quality: Our Sediment Filtration System removes incoming sediment that can damage equipment, reduce the efficacy of secondary disinfection, and provide a nutrient source for bacteria.

• Water-efficient: Designed to be sustainable and efficient, our system uses little water, typically operating at 99% water efficiency.

• Low maintenance: With its innovative stainless steel filters and self-cleaning technology, there are no filters to replace, saving staff time, money, and waste.

• Smart: A controller with a touchscreen display constantly monitors the status and operation of the system, initiating self-cleaning cycles when sediment build-up reaches a certain level and sending out alarm notifications if issues occur. Staff can easily access performance data, adjust setpoints, and manually control the system through the on-system digital display.

• Remotely monitored: A remote monitoring system tracks and logs data 24/7, providing real-time diagnostics, troubleshooting, and reporting by LiquiTech engineers.

• Long-term savings: Removing sediment from your water supply helps prevent premature damage to plumbing infrastructure. Your water-bearing equipment and pipes will last longer and require less maintenance time and money in the long run.

• Compact: Our system takes up minimal floor space and does not require storage of cartridges, sand, bags, or other consumables.

Features

• Automatic, self-cleaning filter(s): As water flows through the filter, sediment is pulled out and deposited on the coarse and fine screens. Once the cleaning cycle is complete, the flush valve closes, and the system returns to normal operation - using only a few gallons of water. Sediment build up causes a pressure differential. Once a differential of 7 PSI is reached, a cleaning cycle is initiated. The flush valve opens, creating a low-pressure path for the suction nozzles to vacuum the debris from the screen. Purge cycle is completed without interrupting the main flow.

• Solid-state digital pressure gauges (sensors): The system's filter pressure sensors are a solid-state pressure sensor that reports the inlet and outlet pressure back to the LFC controller by a 4-20mA control signal. The sensors are NSF 61 certified and are capable of reporting pressures ranging from 0-300 PSI with a 0.25% accuracy.

• Flush valves: The pressure valves operate on 24VAC and are electrically actuated ball valves. They are mounted on the end of the filter and are actuated only during a backflush cycle, typically spending most of their life closed during normal operation. They are NEMA 4 rated.

• Electric emergency bypass valve(s): If the controller initiates more than three back flushes in two minutes, the emergency bypass valve will open. While this potentially allows unfiltered water downstream, the emergency bypass valve prevents a water disruption should the filter detect an issue with the cleaning process.

• Controller with touchscreen display: Constantly monitors the status and operation of each individual filter in the system. The controller, which consists of a powder coated NEMA 3 steel enclosure and touch screen interface, orchestrates all operations of the system. The controller includes mounting feet to allow it to be mounted to any flat surface. It is not rated for outdoor use.

Specifications

• Flushing volume: Typically less than 0.01% of total water use per gallon

• Flush flow rate: 60–320 GPM

• Flush duration: 6-8 seconds per filter

• Line sizes: 2”–12”

• Screen opening: 5-100 microns

• Filtration material: Sanitary 316 stainless steel

• Pressure: 45–200 PSI

• Temperature limit: 160°F

• Flow rate: 10–20,000 GPM

• Solely works on water pressure

• Measures, records, and stores flow differential, inlet pressure, outlet pressure, and flushes per hour

• Alarms and alerts when outside of parameters

• Remote monitoring by LiquiTech’s engineering staff

• Connects with building management systems

• Local dynamic visualization of system operation

• NSF 61 approved and certified

• Sanitary 316 stainless steel media and 304 stainless steel housing

• Skids available