TEROSON FO2 SK1&SK2

TEROSON FO2 SK1&SK2 is a Watertight, vapor-permeable and elastic sealing strip system for outdoor use with innovative PSA – Technology. For providing protection against moisture and enabling diffusion of residual construction moisture from the functional/insulation level to the outside. Can be pre-installed on the frame/profile due to very high movement absorption and tear resistance.

Roll length: 25 m

Width: 150 mm, 200 mm, 250 mm, 300 mm, 350 mm, 400 mm, 500 mm

Специфікація

Properties:
- Vapor-permeable (sd value: < 1 m)
- Immediately water-, driving rain- and airtight
- UV-, weather- and bitumen-resistant
- Equipped with self-adhesive strips – one-sided (SK1) and double-sided (SK2) based on innovative PSA-technology
- Adhesion even on wet window profiles
- No need for additional mechanical fastening
- Flexible and neatly mouldable to the substrate, therefore easy and efficient application
- Even at low temperatures, can be applied down to -5 °C
Approvals:
- EMICODE EC 1 PLUS
Technical descriptions:
- Colour: Grey
- Sealing strip thickness: Appx. 0.3 mm
- Fire resistance: (DIN EN 13501-1) Class B-s2, d0
- Watertightness: (DIN EN 1928) 3 bar / 72 h ≙ 30 mW
- Sd-value (DIN EN ISO 12572): < 1 m
- Resistance to air permeability: (DIN EN 12114) provided
- Tensile strength in N/50 mm: (MD & TD / DIN EN 12310-1) 350 / 330
- Tear resistance in N: (MD & TD / DIN EN 12310-1) 170 / 180
- Dimensional stability in %: (MD & TD / DIN EN 1107-2) Ca. -0,4 / ±0,1
- Temperature resistance: -40 °C to +100 °C
- Application temperature: -5 °C to +35 °C
- UV resistance: (DIN EN 13589-2) > 5 years
- Bitumen compatibility: provided
- Roll dimensions: Length: 25 m; Width: 150, 250, 350, 500, 1000 mm
Installation instructions:
After removing the 30 mm wide release film, the sealing strip can be fixed cleanly and efficiently to the profile / building substrate. Press the sealing strip firmly down with a TEROSON hard rubber roller so that it cannot slip when the next steps are carried out. In the next step, the SK 1 version is bonded to the building structure using TEROSON AD KDS adhesive paste. Apply strands of TEROSON AD KDS FR to the substrate using either a manual or a compressed air gun (pressure 0.5 to 5 bars). Afterwards, press the sealing strip into the adhesive paste while it is still fresh and skin-free. Roll the strip over with a pressure roller. We recommend a bonding width of ≥ 40 mm. Make sure to fix the strips in such a way that no capillary water can be absorbed. Press the strips firmly down, especially in overlapping and edge areas, using the hard rubber roller.