Industrial Control Damper - Thermally Broken Frame - Broken Airfoil Parallel Blade - TICD-51BF

Thermally Broken Frame Control Damper
Broken Airfoil Blade

The TICD-51BF control damper employs thermally insulated and broken aluminum airfoil blades and a thermally broken rugged channel frame to eliminate the transfer of heat or cold penetration and reduce condensation. The TICD51BF damper provides extreme low leakage as well as exceptional air control in medium to high pressure and velocity applications. Both models comply with the IECC (International Energy Conservation Code) with a leakage rating of 3 cfm/ft² @ 1 in. wg. (0.015 m³/s/m² @ 0.25 kPa) or less.

Специфікація

Standard Construction
Frame: 4" x 1" x 0.081" (102 x 25 x 2) top/bottom and
4" x 1-1/8" x 0.081" (102 x 29 x 2) jambs, extruded aluminum channel.
Blades: 6" (152) heavy gauge, dual wall thermally insulated and broken extruded aluminum - airfoil. Parallel.
Axles: 1/2" (13) diameter plated steel hex.
Linkage: Concealed in frame.
Bearings: Synthetic.
Seals: Silicone - blade edge and jambs. Mechanically fastened.
Control Shaft: 1/2" x 6" (13 x 152) round drive axle with outboard shaft support bracket and bearing supplied for field installation. Factory installed 3/4" (19) diameter jackshaft on all multiple section dampers more than 2 sections wide.
Minimum Size: 6" x 6.5" (152 x 165)
Maximum Size:
Single Section: 60" x 72" (1524 x 1829)
Multiple Section: Unlimited

Ratings
Temperature: -70^oF to 212^oF (-57^oC to 100^oC)
Leakage Class: 1A and 1 (see table on product sheet)

Технічна специфікація

Унікальний номерIndustrial-Control-Damper-Thermally-Broken-Frame-Broken-Airfoil-Parallel-Blade-TICD-51BF
Сімейство продуктівHVAC
Група продуктівAir Control Dampers
ТипObject (single object)
Дата публікації2024-07-16
Номер видання1

Посилання

Url-адреса продуктуhttps://www.pottorff.com/product/details/352

Класифікація

Категорія BIMobjectHVAC - Ductwork
Код Uniclass 2015Pr_65_65_24
Опис Uniclass 2015Duct dampers
Код CSI MasterFormat 201423 33 13.13
Заголовок CSI MasterFormat 2014Volume-Control Dampers
Номер OmniClass23-33 29 37
Заголовок OmniClassVolume Control Dampers

Доступність регіону

Північна Америка
Anguilla
Antigua and Barbuda
Aruba
Barbados
Belize
Bermuda
British Virgin Islands
Canada
Caribbean Netherlands
Cayman Islands
Collectivity of Saint Martin
Costa Rica
Cuba
Curaçao
Dominica
Dominican Republic
El Salvador
Greenland
Grenada
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts and Nevis
Saint Lucia
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Saint-Barthélemy
Sint Maarten
The Bahamas
Trinidad and Tobago
Turks and Caicos Islands
U.S. Virgin Islands
United States