Slab without bevel pavinature 60x40

Prefabricated high-strength concrete pavement of the Pavigesa® brand. Conceived to be used in outdoor spaces, for use with vehicle traffic or pedestrian use, it meets all the requisites required by current regulations regarding mechanical resistance, durability and slipperiness in any climatic situation. In Pavigesa® we use Econature® technology, which converts our prefabricated concrete pavements into photocatalytic NO2 collectors, converts the neutralization of greenhouse gases in cities. Our Econature® flooring requires the required Class 3 decontamination requirement according to UNE 127197-1 2013. Every detail is important, so our pavers are manufactured using a unique pressure and sealing system in the market, specially designed by Pavigesa® for 35 years to help close the exterior pores of the paver, thus achieving a uniform and waterproof finish of a unbeatable quality. In Pavigesa® we use 20% of raw material obtained from recycled material, mostly from the manufacturing system itself, thus contributing to a very low production of CO2 in the manufacturing process.

Специфікація

Pavigesa® brand vibro-pressed concrete paving pavement. Physico-mechanical characteristics: • Breaking load T> = 3.6 Mpa • Breaking load per Unit of Length (F)> = 250 N / mm² • Abrasion wear resistance Class 4 Marking I • Class 3 slip / slip resistance according to CTE. Average declared value 75.0 - USRV • Water Absorption Class 2 Marking B • Climate resistance Class 2 Marking B. Water absorption% by mass <= 6% PAVIGESA® PREFABRICATED ADOQUINES AND Slab INSTALLATION RECOMMENDATIONS 1st Supporting Base: • Option 1: Compacted floor, 20cm to 25cm • Option 2: Reinforced concrete flooring, 15cm to 20cm with 15x15x6mm welded mesh on compacted floor, 20cm to 25cm It will depend on the stability of the land. 2nd Placement of pavers and slabs: • 4 cm of river washed sand without clays or 4 cm of gravel with 0-5mm granulometry. • Pavigesa® tile or paver. • Grouting with silica sand in successive sweeps up to 90-100% of the joint. The approximate amount used will be 7.0 kg / m2 • Compaction with 400Kg mechanical tray (rubber). Not recommended for large tiles. • Final grouting until the board is clogged. The placement of the paving system and slabs is done as a flexible pavement, so there is no need to include cement mortar in its placement as long as the contour of the surface to be covered is properly confined (curb or any other confinement system .) It is not necessary to use additional separators in the parts.

Технічна специфікація

Унікальний номерbaldosa_sin_bisel_pavinature_60x40
Сімейство продуктівSlabs
Група продуктівSlabs
ТипObject (single object)
Дата публікації2019-10-08
Номер видання1
Висота (мм)400
Ширина (мм)600

Посилання

Url-адреса продуктуhttps://www.pavigesa.com/productos/losa-pavinature-60x40
Відео з монтажуhttps://www.creur.es/gu%C3%ADas-de-montaje/

Пов'язані

Матеріал основнийConcrete
Матеріал допоміжнийConcrete
Розроблено вSpain
Виготовлено вSpain
Вага нетто (кг)130

Класифікація

Категорія BIMobjectБудівельні матеріали - Pavers & Stones
Класифікація IFCFloor
Назва UNSPSCConcrete tiles or flagstones
Код UNSPSC30131703
Код Uniclass 2015Pr_25_93_60_19
Опис Uniclass 2015Concrete pavers
Код CSI MasterFormat 201432 13 13
Заголовок CSI MasterFormat 2014Concrete Paving
Номер OmniClass23-11 21 17 11 17
Заголовок OmniClassPrecast Concrete Pavers

Доступність регіону

Південна Америка	Північна Америка	Європа
Argentina	Belize	Spain
Bolivia	Costa Rica
Chile	Cuba
Colombia	Dominican Republic
Ecuador	El Salvador
Falkland Islands (Islas Malvinas)	Guatemala
French Guiana	Haiti
Guyana	Honduras
Paraguay	Jamaica
Peru	Mexico
Suriname	Nicaragua
Uruguay	Panama
Venezuela	Puerto Rico
	The Bahamas
	Trinidad and Tobago