Публікуйте свої продукти
ARDEX MC™ RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Products​​​
ARDEX MC™ RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Products​​​
ARDEX MC™ RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Products​​​
    ARDEX

    ARDEX MC™ RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Products​​​

    The ARDEX MC™ RAPID MOISTURE CONTROL SYSTEM is a one-coat, 100% solids epoxy moisture management system formulated to suppress excessive moisture vapor emissions in new or existing concrete prior to installing an ARDEX underlayment with flooring. It is especially suited to treat areas of new concrete in critical installations, such as health care and institutional applications where the construction schedule does not allow adequate drying of the concrete. ARDEX MC RAPID is also recommended over existing concrete where the level of moisture emissions from the slab exceeds the maximum allowed by the manufacturer of the finished floor covering.

    • One-coat epoxy resin system
    • No sand broadcast required for underlayment applications of 1/4” (6 mm) or less
    • Ready to prime in just 4 hours
    • Solvent free, alkali resistant
    • Tenacious bond to substrate
    • Reduces vapor emissions to acceptable levels for floor coverings
    • For RH readings up to 100%
    • ASTM E96 perm rating - 0.06
    • Use under all standard commercial and residential floor coverings on interior substrates only
    • Use under all ARDEX interior toppings (sand broadcast method only)

    Available in 1.65 gal. (6.25 L) unit

    Технічна специфікація
    • Унікальний номерardex-mc-rapid
    • Сімейство продуктівMoisture Control System
    • Група продуктівSubstrate Preparation
    • ТипObject (single object)
    • Дата публікації2018-09-07
    • Номер видання1
    Пов'язані
    • Розроблено вUnited States
    Класифікація
    • Категорія BIMobjectПідлогове покриття - Coatings & Coverings
    • Код CSI MasterFormat 201409 90 00
    • Заголовок CSI MasterFormat 2014Painting and Coating
    • Номер OmniClass23-15 17 29 11
    • Заголовок OmniClassIndustrial Floor Coatings

    Доступність регіону

    Північна Америка Океанія
    Anguilla
    New Zealand
    Antigua and Barbuda
    Aruba
    Barbados
    Belize
    Bermuda
    British Virgin Islands
    Canada
    Caribbean Netherlands
    Cayman Islands
    Collectivity of Saint Martin
    Costa Rica
    Cuba
    Curaçao
    Dominica
    Dominican Republic
    El Salvador
    Greenland
    Grenada
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Kitts and Nevis
    Saint Lucia
    Saint Pierre and Miquelon
    Saint Vincent and the Grenadines
    Saint-Barthélemy
    Sint Maarten
    The Bahamas
    Trinidad and Tobago
    Turks and Caicos Islands
    U.S. Virgin Islands
    United States