CD60GS (GENSET) Damper

Name: CD60GS (GENSET) Damper
Rating: 4.2 (5 reviews)

4.2(5 reviews)

High-performance Galvanized Steel Airfoil Blade Damper AMCA Class IA Leakage Rated (GENSET)

The CD60GS is designed to provide maximum combustion air and pressure relief quickly for emergency generator start up to avoid damage of equipment orsurrounding space. The factory mounted fast-acting 8-second spring open actuatorprovides optimal performance and reliability. The CD60GS also provides AMCA class 1A leakage rating of 3cfm/ft2 at 1” w.g. when blades are closed to meet requirements of the International Energy Conservation Code (IECC).

Özellikler

Furnish and install, at locations shown on plans, low leakage airfoil control dampers meeting the following minimum construction standards. Control dampers shall be produced in an ISO9001 certified factory. Frame shall be one-piece uniframe construction of 16 ga. (1.6) galvanized steel roll formed hat channel structurally equivalent to a minimum 13 ga. (2.4) frame. Blades shall be 14 ga. (2.0) equivalent galvanized steel, rollformed airfoil type for low pressure drop and low noise generation. Blade edge seals shall be Santoprene TPV type or equivalent mechanically locked into the blade edge.
Adhesive or clip-on type seals are unacceptable. Jamb seals shall be stainless steel chambered compression type to prevent leakage between blade end and damper frame. Blade end overlapping frame is unacceptable. Multiple section dampers must have factory installed jackshafts unless clearly eliminated by engineer. Bearings shall be 304 stainless steel, oil impregnated, and self-lubricating sleeve type with a 450 pound (204 kg) minimum radial crush load. Bearings shall turn in extruded holes in the damper frame. Axles shall be hexagonal positively locked into the damper blade.
Linkage shall be concealed out of airstream, within the damper frame to reduce pressure drop and noise. Temperature limits shall be -72°(-58°C) to +275°F (+135°C). Submittal must include leakage, maximum air flow and maximum pressure ratings based on AMCA Publication 500. Damper shall be tested and licensed in accordance with AMCA 511 for Air Performance and Air Leakage. Damper widths from 12” to 48” (305 to 1219) wide shall not leak any greater than 3 cfm/sq.ft. at 1” w.g. (15.2 l/s-m2
at .25 kPa). Damper shall be factory equipped with fast acting 8-second spring return electric actuator with 40,000 open/closed cycle testing, and shall be equivalent in all respects to Ruskin Model CD60GS.

Teknik özellikler

Benzersiz ref.CD60GS
Ürün ailesiDampers for Air Ductwork
Ürün grubuCommercial Control Dampers
TipObje (Tekil Nesne)
Yayınlanma tarihi2022-07-28
Baskı numarası1

Bağlantılar

Ürün URL’sihttps://www.ruskin.com/model/cd60gs-genset
Teknik açıklamahttps://www.ruskin.com/doc/Id/9866
İhale bilgilerihttps://www.ruskin.com/doc/Id/10091

İlgili

Ana malzemeGalvanize Çelik
Tasarım yeriBirleşik Devletler
Üretim yeriBirleşik Devletler

Sınıflandırma

BIMobject kategorisiHVAC - Kanal sistemi
IFC sınıflandırmasıDamper
UNSPSC adıVentilation dampers
UNSPSC kodu40101504
Uniclass 2015 koduPr_65_65_24
Uniclass 2015 açıklamasıDuct dampers
CSI MasterFormat 2014 kodu23 09 13.43
CSI MasterFormat 2014 başlığıControl Dampers
OmniClass numarası23-33 29 00
OmniClass başlığıHVAC Dampers
CSI UniFormat II koduD3090
CSI UniFormat II başlığıOther HVAC Systems & Equipment

Bölge bulunurluk durumu

Avrupa	Asya	Kuzey Amerika	Afrika	Güney Amerika	Okyanusya
Åland	Afganistan	Anguilla	Angola	Arjantin	Amerikan Samoası
Almanya	Azerbaycan	Antigua ve Barbuda	Batı Sahara	Bolivya	Avustralya
Andorra	Bahreyn	Aruba	Benin	Brezilya	Cook Adaları
Arnavutluk	Bangladeş	Bahamalar	Botswana	Ekvador	Fiji
Avusturya	Bhutan	Barbados	Burkina Faso	Falkland Adaları (Islas Malvinas)	Fransız Polinezyası
Belçika	Birleşik Arap Emirlikleri	Belize	Burundi	Fransız Guyanası	Guam
Beyaz Rusya	British Indian Ocean Territory	Bermuda	Çad	Guyana	Kiribati
Bosna Hersek	Brunei Sultanlığı	Birleşik Devletler	Cape Verde	Kolombiya	Kuzey Mariana Adaları
Bulgaristan	Christmas Adası	Caribbean Netherlands	Cezayir	Paraguay	Marshall Adaları
Cebelitarık	Çin	Cayman Adaları	Cibuti	Peru	Mikronezya Federal Devletleri
Çek Cumhuriyeti	Cocos Adaları	Curaçao	Comoros	Şili	Nauru
Danimarka	Endonezya	Dominik	Demokratik Kongo Cumhuriyeti	Surinam	New Caledonia
Estonya	Ermenistan	Dominik Cumhuriyeti	Ekvator Ginesi	Uruguay	Niue
Faroe Adaları	Filipinler	El Salvador	Eritre	Venezuela	Norfolk Adası
Finlandiya	Filistin	Grenada	Esvatini̇		Palau
Fransa	Güney Kore	Grönland	Etiyopya		Papua Yeni Gine
Guernsey	Gürcistan	Guadeloupe	Fas		Pitcairn Adaları
Hırvatistan	Hindistan	Guatemala	Fildişi Sahili		Samoa
Hollanda	Hong Kong	Haiti	Gabon		Solomon Adaları
İngiltere	Irak	Honduras	Gambiya		Timor-Leste
İrlanda	İran	İngiliz Virjin Adaları	Gana		Tokelau
Isle of Man	İsrail	Jamaika	Gine		Tonga
İspanya	Japonya	Kanada	Guinea-Bissau		Tuvalu
İsveç	Kamboçya	Kostarika	Güney Afrika		United States Minor Outlying Islands
İsviçre	Katar	Küba	Güney Sudan		Vanuatu
İtalya	Kazakistan	Martinique	Kamerun		Wallis ve Futuna
İzlanda	Kırgızistan	Meksika	Kenya		Yeni Zelanda
Jersey	Kuveyt	Montserrat	Kongo
Karadağ	Kuzey Kore	Nikaragua	Lesotho
Kıbrıs	Laos	Panama	Liberya
Kuzey Makedonya	Lübnan	Porto Riko	Libya
Letonya	Macau	Saint Barthélemy	Madagaskar
Liechtenstein	Maldivler	Saint Kitts ve Nevis	Malavi
Litvanya	Malezya	Saint Lucia	Mali
Lüksemburg	Moğolistan	Saint Martin	Mauritius
Macaristan	Myanmar (Burma)	Saint Pierre ve Miquelon	Mayotte
Malta	Nepal	Saint Vincent ve Grenadines	Mısır
Moldova	Özbekistan	Sint Maarten	Moritanya
Monako	Pakistan	Trinidad ve Tobago	Mozambik
Norveç	Singapur	Turks ve Caicos Adaları	Namibya
Polonya	Sri Lanka	Virjin Adaları	Nijer
Portekiz	Suriye		Nijerya
Romanya	Suudi Arabistan		Orta Afrika Cumhuriyeti
Rusya	Tacikistan		Reunion
San Marino	Tayland		Ruanda
Sırbistan	Tayvan		Saint Helena
Slovakya	Türkiye		São Tomé ve Príncipe
Slovenya	Türkmenistan		Senegal
Svalbard	Umman		Seychelles
Ukrayna	Ürdün		Sierra Leone
Vatikan	Vietnam		Somali
Yunanistan	Yemen		Sudan
			Tanzanya
			Togo
			Tunus
			Uganda
			Zambiya
			Zimbabwe