Protecta FR Collar

Protecta^® FR Collars are designed to maintain the fire resistance of fire rated walls and floors where these are breached by service penetrations, and may be used in drywalls, timber, masonry or concrete walls and floors.

Each collar consists of a white or red coated circular steel shell that splits in two to fit around the service penetrations by means of a simple ’slide-lock’ system. The steel shell contains a graphite based reactive material which reacts when exposed to heat from fire closing the openings left by the softening combustible material.

Available in the following sizes:

Ø55/50mm, Ø82/50mm, Ø110/50mm, Ø125/60mm, Ø160/60mm, Ø200/75mm, Ø250/75mm and Ø315/75mm.

Özellikler

- Classified for fire sealing all types of constructions such as drywalls, masonry and concrete walls, concrete and composite floors, and solid or cross-laminated timber walls and floors.
- Classified for fire sealing all types of building service penetrations such as cable bundles, cable conduits, steel pipes, copper pipes, composite pipes, PVC pipes, PE pipes, ABS pipes, PP pipes and PEX pipe-in-pipes.
- Metal and plastic pipes are classified with commonly used elastomeric pipe insulations, continuous through the fire seal.
- Approved plastic pipe sizes range from smallest pipes available to Ø400mm, each with a wide range of pipe wall thicknesses.
- Approved with a single collar in some concrete and masonry wall applications, reducing cost.
- Collars are available in two different heights for different fire classifications to maximise cost-efficiency.
- Smaller pipes can be fitted within larger collars with the benefit of accommodating pipes that are at an angle, or if the opening around the pipe is too large.
- Fire classifications up to 240 minutes for both integrity and insulation.
- Tested and certified for U/U pipe end applications.
- Very high sound insulation (Rw 58 dB).
- Causes no deleterious effects on cPVC pipes like BlazeMaster, supported by mechanical testing evidence.
- No emissions - environmentally and user friendly.
- Simple to install using widely available standard fixings.
- 30 years working life guarantee.
- The product hold the following approval marks: CE-mark for Europe, UL-EU certificate for Asia and South America, UAE Certificate of Compliance for United Arab Emirates, AS Assessment for New Zealand and Australia.

Teknik özellikler

Benzersiz ref.Protecta_FR_Collar
Ürün ailesiProtecta
Ürün grubuFR Collar
TipObje (Tekil Nesne)
Yayınlanma tarihi2020-03-17
Baskı numarası1

Bağlantılar

Ürün URL’sihttps://www.protecta.co.uk/product/fr-collar/
Teknik açıklamahttps://www.protecta.co.uk/wp-content/uploads/2021/02/Technical-Data-Sheet-2.pdf

İlgili

Ana malzemeÇelik
Tasarım yeriİngiltere
Üretim yeriİngiltere

Sınıflandırma

BIMobject kategorisiYangın Ürünleri - Yangın Durdurucular
IFC sınıflandırmasıNesne

Bölge bulunurluk durumu

Avrupa
Åland
Almanya
Andorra
Arnavutluk
Avusturya
Belçika
Beyaz Rusya
Bosna Hersek
Bulgaristan
Cebelitarık
Çek Cumhuriyeti
Danimarka
Estonya
Faroe Adaları
Finlandiya
Fransa
Guernsey
Hırvatistan
Hollanda
İngiltere
İrlanda
Isle of Man
İspanya
İsveç
İsviçre
İtalya
İzlanda
Jersey
Karadağ
Kıbrıs
Kuzey Makedonya
Letonya
Liechtenstein
Litvanya
Lüksemburg
Macaristan
Malta
Moldova
Monako
Norveç
Polonya
Portekiz
Romanya
Rusya
San Marino
Sırbistan
Slovakya
Slovenya
Svalbard
Ukrayna
Vatikan
Yunanistan