Arşivlendi

Square meeting table TOLA

TOLA is an iconic piece for Ofifran. The Dorigo Design studio has created this collection composed of executive desks with credenza and joint tables with 80mm thick tops, worked in American walnut and veneered by our craftsman with 4 sturdy 110mm columns, inclined and veneered with an inner curved radius of 100mm.

The table is ready to be machined with practical cable access and lowered through one of the columns by means of a solid channel and placed by means of small magnets. The table is prepared for machining the top with a practical cable access and the lowering by one of its columns through a solid channel and placed by means of small magnets.

A collection for executive areas, TOLA represents an icon of design, capable of enhancing the values of executive furniture both in desks and meeting tables.

Özellikler

Meeting table with main work surface 1400 x 1400 x 750 mm.
The table top is made of MDP 630 kg/m3 board 20 mm thick, at a 90° angle, 80 mm thick and veneered with natural American walnut veneer, with a short continuity on the short side. The inclined feet are made with 110 mm thick MDP board and American walnut veneer with vacuum membrane, curved on the inside radius 100 mm and at a 90° angle on the outside. These feet have a trim to hide the rise of the cables by means of magnets and regulators for correct levelling of the table. Two of these feet have a bezel to hide the rise of the cables through magnets. The other two are solid, so that the table always has an electrified foot on each side. Optional machined in wood with opening hinges on both sides for access to electrification.
The customer must specify the size desired and its position on the table top. The insertion of the electrification entails that a box will protrude from the underside of the table.

Teknik özellikler