Tago 2 - Outside Lighting

Linear profile for outdoor applications
drive-over up to 2000 kg
recessed (floor)
Power consumption: 51W
Power supply: 230Vac
Lumen output at source: 5968 lm (3000K)
Delivered lumen output: 4469 lm (3000K, 31°)
48 SMD LEDs pitch 20 mm, 2-step MacAdam, 60000h L80 B10 (Ta 25°C)  2200K: 3-step MacAdam, 60000h L80 B10 (Ta 25°C)
LED colour: 2200K, 2700K, 3000K, 4000K
Optics: 11° tiltable ±20°, 17° tiltable ±20°, 31° tiltable ±20°, 69° tiltable ±20°: optical system composed of a series of equidistant tiltable light sources, 20.83 mm apart. Fitted with locking screw. The deep-set PMMA TIR lens guarantees high-quality light emission and visual comfort., 20°x49° tiltable ±20°: optical system composed of a series of equidistant tiltable light sources, 20.83 mm apart. Fitted with locking screw. The deep-set elliptical PMMA TIR lens guarantees high-quality light emission and visual comfort, wall grazing  tiltable ±20°, wall washer  tiltable ±20°: optical system composed of a series of equidistant tiltable light sources, 20 mm apart. Fitted with locking screw. The deep-set asymmetrical PMMA lens guarantees high-quality light emission and visual comfort.
CRI Colour Rendering Index: 80
Body material: body made of Anticorodal® low-copper-content aluminium EN AW 6060 T5 for excellent heat dissipation, manufactured from an extruded profile and subjected to a deep black anodizing process (over 20 microns) for excellent corrosion resistance. Caps made of technopolymer for greater resistance to corrosion and atmospheric agents
Screen material: 8-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches, 8-mm-thick acid-etched, tempered extra-clear glass, with grey-vitrified serigraphy (RAL 7015) resistant to knocks and scratches, and with high transmittance to eliminate chromatic aberrations (version with wall-washer optics)
Seals: Santoprene™ O-rings guarantee lasting resistance to UV rays
Installation: In/out connection. On/off version: one IP68 4-way connector for power supply. Dimmable version: one IP68 4-way connector for power supply and two IP68 3-way connectors for DALI and 0/1–10V signal
built-in power supply unit
on/off: includes 1.5 m neoprene cable H07RN-F 3x1.0 Ø9.3 mm  DALI, 0/1-10V: includes 2x1.5 m neoprene cables H05RN-F 2x1.0 Ø6.7 mm
Control system: ON/OFF, 0/1-10V, DALI
Ingress protection: IP65, IP67
Impact resistance: IK09
optical accessories of honeycomb louvre and anti-glare shield built into the lighting fixture and tiltable together with the optics
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 55°C (Ta 25°C)
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class I
Weight: 3658 g
Dimensions: 56x116x1029 mm
Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012
Accessories: honeycomb louvre, anti-glare shield, WCTG23A0F Outer casing, WFA0005 5-m interconnect cable, WFA02 IP68 three-way connector, WFA03 3-pin female connector, WFA04 3-pin male connector, WN6005 Alignment kit for outer casing
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption