Intono C OUT 3.4 - Ceiling Mounted Lighting

ceiling mounted for outoor applications
surface mounted (ceiling)
Power consumption: 20W
Power supply: 230Vac
Lumen output at source: 1644 lm (3000K, CRI 90), 1976 lm (3000K, CRI 80)
Delivered lumen output: 1392 lm (3000K, 15°, CRI 90), 1674 lm (3000K, 15°, CRI 80)
2 high power density COB LEDs, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 15°, 20°, 43°: optical system consisting of a recessed high-efficiency metallized polycarbonate reflector, asymmetrical: optical system consisting of an asymmetrical PMMA lens
CRI Colour Rendering Index: 80, >90
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion
Finishes: cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity and tempered for excellent resistance to knocks and scratches, with a vitrified RAL 9005 black serigraphed border
built-in power supply unit
Control system: DALI, ON/OFF, 0/1-10V
Ingress protection: IP65
Impact resistance: IK06
easy installation thanks to 4-point magnetic fastener
version compatible with Google Home or Amazon Echo available on request for voice command control
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class I
Weight: 1350 g
Dimensions: 85x165x100 mm
Energy efficiency class: A / A+ / A++ (integrated LED module) in accordance with UE 874/2012
Accessories: honeycomb louvre
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption