Intono 4 - Outside Lighting

wall mounted for outdoor applications, single beam / double beam
surface mounted (wall)
Power: 19W (Intono 4.1) - 38W (Intono 4.2) - 17W (Intono 4.9)
Power supply: 230Vac (Intono 4.1 - 4.2) - 24Vdc (Intono 4.9)
Lumen output at source: 1646 lm (3000K, CRI 80), 1368 lm (3000K, CRI 90) per beam
Delivered lumen output: 1386 lm (3000K, 12°, CRI 80), 1152 lm (3000K, 12°, CRI 90) per beam
Intono 4.1 / 4.9: 1 high power density COB LED, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C) - Intono 4.2: 2 high power density COB LEDs, 2-step MacAdam, 50 000h L95 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: Intono 4.1 / 4.9: 12°, 23°, 57°: optical system consisting of a high-efficiency metallized technopolymer reflector, asymmetrical 28°: optical system consisting of a high-efficiency spherical lens with an asymmetrical holder in black anti-glare technopolymer, asymmetrical: optical system consisting of an asymmetrical technopolymer lens, wall grazing: optical system consisting of a high-efficiency metallized technopolymer reflector and technical filter. An anti-glare black technopolymer holder completes the optical system - Intono 4.2: 12°+12°, 12°+57°, 23°+23°, 57°+57°: double-beam optical system consisting of a high-efficiency metallized technopolymer reflector, asymmetrical 28°+57°: double-beam optical system consisting of an asymmetrical technopolymer lens high-efficiency metallized technopolymer reflector, wall grazing + asymmetrical: double-beam optical system consisting of a high-efficiency metallized technopolymer reflector, technical filter, black anti-glare technopolymer holder and asymmetrical technopolymer lens, wall grazing + wall grazing: double-beam optical system consisting of a high-efficiency metallized technopolymer reflector and technical filter. An anti-glare black technopolymer holder completes the optical system
CRI: 80, 90
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 46100 for excellent resistance to corrosion
Finishes: white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass, with high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches, with a RAL 9005 black serigraphed border
Installation: the symmetric mounting bracket means the device can be installed without any restrictions on orientation between the bracket and the body of the device
built-in power supply unit
Control system: ON/OFF, 1-10V
Ingress protection: IP65
Impact resistance: IK06
version compatible with Google Home or Amazon Echo available on request for voice command control; DALI version available on request
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: II
Weight: 4800 g
Dimensions: 166x110x330 mm
Energy efficiency class: A / A+ / A++
Accessories: honeycomb louvre
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption