Ginko 1.0 - Outside Lighting

projector for outdoor applications
surface mounted (ceiling, wall, ground, spike)
Power: 2,5W, 3,5W
Power supply: 24Vdc
Lumen output at source: 224 lm (3000K, 3.5W, CRI 80), 196 lm (3000K, 3.5W, CRI 90), 168 lm (3000K, 2.5W, CRI 80), 147 lm (3000K, 2.5W, CRI 90)
Delivered lumen output: 193 lm (3000K, 3.5W, 19°, CRI 80), 164 lm (3000K, 3.5W, 19°, CRI 90), 146 lm (3000K, 2.5W, 19°, CRI 80), 124 lm (3000K, 2.5W, 19°, CRI 90)
1 power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 12° optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 19° optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 36° optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, sharp 38° SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, combined with a high-quality technical filter, 58° optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 16°x36° optical system consisting of a high-efficiency TIR lens, 36°x16° optical system consisting of a high-efficiency TIR lens
CRI: 80, 90
Body material: body and bracket made of AISI 316L stainless steel, made entirely on a CNC lathe and then tumble finished, body made of ANTICORODAL 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe. Bracket in AISI 316L stainless steel, tumble finished and painted, body made of ANTICORODAL 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe. Bracket in AISI 316L stainless steel, tumble finished
Finishes: finish that provides corrosion resistance of more than 3000 hours of salt spray, making it possible to use the product even in extremely severe atmospheric conditions, cor-ten finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, jasper green finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, black finish obtained by electro-colouring, which offers the product better heat dissipation and provides corrosion resistance of more than 1500 hours of salt spray, anthracite finish obtained through an initial treatment of the material with ALODINE NT-E®, followed by a coat of epoxy paint and one of POLYESTER paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
power supply unit not included
includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm
Ingress protection: IP66, IP69K
Impact resistance: IK07
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: risk group 1 according to EN6 2471:2006
Appliance class: III
Weight: 130 g
Dimensions: Ø34x49 mm
Energy efficiency class: A / A+ / A++
Accessories: WB80115 Standard snoot - jasper green, WB8011E Standard snoot - white, WB8011F Standard snoot - grey, WB8011H Standard snoot - anthracite, WB8011N Standard snoot - black anodized, WB8011T Standard snoot - cor-ten, WB80215 Asymmetrical snoot - jasper green, WB8021E Asymmetrical snoot - white, WB8021F Asymmetrical snoot - grey, WB8021H Asymmetrical snoot - anthracite, WB8021N Asymmetrical snoot - black anodized, WB8021T Asymmetrical snoot - cor-ten, WF3302 Flexible cable-protection tube - 18 cm, WF8605 Neoprene cable - 5 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8610 Neoprene cable - 10 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8615 Neoprene cable - 15 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8620 Neoprene cable - 20 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8705 Neoprene cable - 5 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8710 Neoprene cable - 10 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8715 Neoprene cable - 15 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WF8720 Neoprene cable - 20 m  H05RN-F 2x0,75/0,75 Ø6,3 mm - IPS, WH8001 Honeycomb louvre , WP0100 Spike for in-ground installation, WP1004 Fastener strap
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption