Publiko produktet
Montara Collection
Montara Collection
    Tournesol

    Montara Collection

    GFRC - LIGHTWEIGHT CONCRETE

    Inspired by the serene and majestic coastline of Northern California. Montara is a sculptural, modern take on a classic mid-century organic shape. The Montara Collection features versatile forms with rounded edges that work together seamlessly, elevating any commercial or residential space.

    • Large in scale for dramatic outdoor spaces
    • Pottery inspired, soft edge rectangles & squares
    • Glass Fiber Reinforced Concrete (GFRC)
    • Durable in all climates
    • Suitable for indoor or outdoor use
    Özellikler
    • Guide Specification

      Section 129300 Site Furnishings

      Section 129200 Interior Planters

      Tournesol Siteworks GFRC Planters, Saucers, and Site Furnishings

      1.0 GENERAL

      1.1 WORK INCLUDED

      A. Provision of lightweight concrete planters, saucers, and site furnishings.

      1.2 RELATED WORK

      A. Section 03300 Cast-in-Place concrete

      B. Section 06100 Rough Carpentry

      C. Section 06200 Finish Carpentry

      1.3 SUBMITTALS

      A. Product Data: Manufacturer's standard catalog cut sheets.

      B. Samples: As required for color selection or material thickness only.

      C. Shop Drawings: For custom applications, showing critical sizes and dimensions for installation and integration with other work.

      1.4 DELIVERY, STORAGE AND HANDLING

      A. Inspect GFRC products after delivery for signs of damage during transit.

      B. Protect planters and site furnishings from damage during storage and handling.

      C. Store planters and planter liners out of harm’s way, in their original packaging.

      1.5 PROJECT CONDITIONS

      A. Contractor to provide adequate structural support for planters and site furnishings.

      B. Protect units from damage by adjacent work. Clean units with water spray to remove workplace dust.

      2.0 PRODUCTS

      2.1 ACCEPTABLE PRODUCTS/MANUFACTURERS

      A. GFRC planters, saucers and site furnishings, manufactured by Tournesol Siteworks, 30955 San Antonio Rd., Hayward, CA 94544 Tel: (800) 542-2282 FAX (510) 471-6243

      2.2 GFRC PLANTERS AND PLANTER LINERS

      A. Materials

      1. Portland Cement: ASTM C150, Type I, II, or III.

      2. Glass Fibers: Alkali resistant, with a minimum zirconia content of 16 percent, 1 to 2 inches long, specifically produced for use in GFRC.

      3. Sand: clean silica, complying with composition requirements of ASTM C144; passing No. 30 sieve with a maximum of 2 percent passing No. 100 sieve.

      4. Coloring Admixture: ASTM C979, synthetic mineral-oxide pigments or colored water-reducing admixtures, temperature stable, nonfading, and alkali resistant.

      5. Water: Potable; free from deleterious material that may affect color stability, setting, or strength of GFRC ..

      6. Polymer Curing Admixture: Acrylic thermoplastic copolymer dispersion complying with PCI MNL 130.

      B. Construction

      Architectural parts shall be fabricated by spray laminate method using suitable molds to attain the desired surface finish. The finished face mix shall be not less than 1/8" thick and thicker in those areas requiring additional structural strength. Where ribs or stiffeners are to be fastened to liner sections by spray laminating over premolded forms, the stiffeners or ribs shall be located and spray laminated into position before the section to which they are to be attached has passed the state of curing, and the finished joint shall be strong and durable.

      1. Backing Mix: Proportion backing mix of portland cement, glass fibers, sand, and admixtures to comply with design requirements. Provide nominal glass-fiber content of not less than 5 percent by weight of total mix.

      2. Face Mix: Proportion face mix of portland cement, sand, and admixtures to comply with design requirements.

      3. Polymer Curing Admixture: 6 to 7 percent by weight of polymer curing admixture solids to dry portland cement.

      4. Coloring Admixture: Not to exceed 10 percent of cement weight.

      D. Finish: specified finish; factory finished.

      E. Sealing: Planters are to be dampproofed on the interior. Site furnishings and planters in the acid-etch finish are to be sealed, adding a mild sheen to the finish. Travertine products remain unsealed.

      E. Sizes: Modular units fabricated to size by the manufacturer as required to fill specified areas. Refer to catalog for standard sizes.

      2.3 PLANTER ACCESSORIES (OPTIONAL)

      A. Field installed drainage/irrigation holes. Drainage holes may be pre-drilled by factory, to a specified location determined by client.

      B. Drainage control products, including pump-out pipe, sleeved corrugated drainage pipe, and, if necessary, overflow drains and atrium drain covers.

      2.3 SITE FURNISHING ACCESSORIES (OPTIONAL)

      A. Anchoring elements to fasten benches and tables to surface. See specific product details for exact type of anchor, and mounting points.

      B. Skateboard deterrent stops are available for GFRC benches and stools as required.

      3.0 EXECUTION

      3.1 PREPARATION

      A. Prior to fabrication, the contractor shall verify as-built dimensions of area for products to ensure proper size, fit and quantity required.

      B. Unless planters have drainage fittings as in 2.3.A, drainage holes to be located and made by contractor in the field to fit to drainage system.

      3.2 INSTALLATION

      A. Move product into position on pallets, where possible. Otherwise, slings are required, and must wrap the product fully.

      B. Provide continuous basal support for product.

      B. Install product level (or shim to level) to permit adequate drainage and irrigation.

      C. Refer to product detail and manufacturer instructions to determine proper location for anchor points. Use manufacturer template if available.

    Teknik özellikler
    • Benzersiz ref.montara-collection
    • Ürün ailesiMontara Collection
    • Ürün grubuMontara Planters
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2024-05-22
    • Baskı numarası1
    İlgili
    • Ana malzemeBeton
    • İkincil malzemeGlass fibre
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiPeyzaj - Peyzaj

    Bölge bulunurluk durumu

    Avrupa Kuzey Amerika Asya Güney Amerika
    Åland
    Anguilla
    Azerbaycan
    Arjantin
    Almanya
    Antigua ve Barbuda
    Bangladeş
    Bolivya
    Andorra
    Aruba
    Bhutan
    Brezilya
    Arnavutluk
    Bahamalar
    British Indian Ocean Territory
    Ekvador
    Avusturya
    Barbados
    Brunei Sultanlığı
    Falkland Adaları (Islas Malvinas)
    Belçika
    Belize
    Christmas Adası
    Fransız Guyanası
    Beyaz Rusya
    Bermuda
    Çin
    Guyana
    Bosna Hersek
    Birleşik Devletler
    Cocos Adaları
    Kolombiya
    Bulgaristan
    Caribbean Netherlands
    Endonezya
    Paraguay
    Cebelitarık
    Cayman Adaları
    Ermenistan
    Peru
    Çek Cumhuriyeti
    Curaçao
    Filipinler
    Şili
    Danimarka
    Dominik
    Güney Kore
    Surinam
    Estonya
    Dominik Cumhuriyeti
    Gürcistan
    Uruguay
    Faroe Adaları
    El Salvador
    Hindistan
    Venezuela
    Finlandiya
    Grenada
    Hong Kong
    Fransa
    Grönland
    Japonya
    Guernsey
    Guadeloupe
    Kamboçya
    Hırvatistan
    Guatemala
    Kazakistan
    Hollanda
    Haiti
    Kırgızistan
    İngiltere
    Honduras
    Kuzey Kore
    İrlanda
    İngiliz Virjin Adaları
    Laos
    Isle of Man
    Jamaika
    Macau
    İspanya
    Kanada
    Maldivler
    İsveç
    Kostarika
    Malezya
    İsviçre
    Küba
    Moğolistan
    İtalya
    Martinique
    Myanmar (Burma)
    İzlanda
    Meksika
    Nepal
    Jersey
    Montserrat
    Özbekistan
    Karadağ
    Nikaragua
    Pakistan
    Kıbrıs
    Panama
    Singapur
    Kuzey Makedonya
    Porto Riko
    Sri Lanka
    Letonya
    Saint Barthélemy
    Tacikistan
    Liechtenstein
    Saint Kitts ve Nevis
    Tayland
    Litvanya
    Saint Lucia
    Tayvan
    Lüksemburg
    Saint Martin
    Türkmenistan
    Macaristan
    Saint Pierre ve Miquelon
    Vietnam
    Malta
    Saint Vincent ve Grenadines
    Moldova
    Sint Maarten
    Monako
    Trinidad ve Tobago
    Norveç
    Turks ve Caicos Adaları
    Polonya
    Virjin Adaları
    Portekiz
    Romanya
    Rusya
    San Marino
    Sırbistan
    Slovakya
    Slovenya
    Svalbard
    Ukrayna
    Vatikan
    Yunanistan