Description
The U1400-FTR is a lightweight rooftop attachment system
consisting of a U-Anchor 1000 Series plate and FiberTite target
membrane. The target membrane is factory sealed to the top of the
plate. The U1400-FTR includes a factory prepared FiberTite target
membrane and separator disk. The U1400-FTR provides a positive
and watertight attachment for mechanically attached and adhered
FiberTite Roof Systems.
Applications
Rooftop Lightning Protection
U-Anchor Attachment
The U1400-FTR is attached by fastening through the roofing
assembly and into the structural decking with 2-4 approved
fasteners, as directed by project specific engineering. The Target
membrane is then hot air welded around the perimeter to the roof
membrane.
Fastener selection is dictated by the system assembly, deck
type, and the project engineer.
Refer to installation instructions before installing.
Equipment Attachment
To securely mount your rooftop equipment to the FiberTite
U-Anchor, after its installed, the connection nut must be fastened
to approximately 20-25 torque pounds.
Use a calibrated torque wrench during install to ensure appropriate
results are achieved.
Ratings
Results are based on plate performance only.
• Ultimate Load - Shear: 3,381 lbs
• Ultimate Load - Tension: 2,028 lbs
Tested in accordance with ICC AC467
