Application
Walkway and protection materials are used to provide defined
paths to facilitate common rooftop traffic and traffic involved in
regular servicing, maintenance and repairs. FiberTite walkway
and protection materials are to be maintained in specific areas
around roof access points (ladders, hatches, doorways, etc.),
around mechanical equipment requiring periodic maintenance
and as a walkway system on roof areas subject to frequent foot
traffic.
Attach these pads by using hot-air to weld 6 in x 6 in (15 cm x
15 cm) strips of FiberTite membrane at the four corners on the
back of the pads. Then “tack” weld the strips to the FiberTite
Roofing System. Do not weld Gray protection pads directly to the
roofing membrane.
For additional recommendations and requirements, please
consult the most current versions of FiberTite Guide
Specifications for the Installation of FiberTite Roofing Systems.
Physical Properties
Thickness .25 in (0.6 cm)
Pad Size 2 ft x 4 ft (0.6 m x 1.2 m)
Dimensional Stability (%) 0.2
Elongation (%) 100%
