Exterior Cladding System - Pine Wood for ventilated façade with visible fixing

Exterior cladding made of pressure-treated solid Pine Wood, Class 4 Use, for ventilated facade. It consists of mechanized rhomboidal section slats with a sugi ban finish, measuring 145 mm in width and 28 mm in thickness, with a length of 3,000 mm.

Facade cladding made of Pine Wood with protection against Class 4 Use (woods in permanent contact with the ground or fresh water). It can be installed horizontally or vertically, using visible stainless steel screws, onto red pine battens measuring 50x30 mm and wild pine battens measuring 50x30 mm, with a length ranging from 2,400 to 3,000 mm. These battens are pressure-treated, Class 4 Use, and placed at a maximum distance of 50 cm from each other.

The cladding is finished with a pigmented sugi ban surface treatment, including UV filters to provide stability against color alteration caused by exposure to solar UV radiation.

There are options for supplying the wood either in its natural state or pre-stained at the factory with different finishing shades.

Thermally-treated Pine Wood cladding with PEFC certification.