BETAFENCE Nylofor 3D LIGHT II + UniLox

Manufactured in Europe 

NYLOFOR 3D LIGHT II
Economical fencing for cost efficiency

The Nylofor 3D Light II panel is an economic professional 3d panel, with good resistance to distortion.

Assets:
- Rigidity thanks to its 3D profiles
- Economic welded panel
- Non-standard color possibilities

PANELS

The Nylofor 3D Light II panels are produced by electrical resistance welded galvanized wires and subsequently polyester coated. It has a barb of 30 mm at the topside. 
The panels have round horizontal wires and vertical "V-shaped" ones. 
The V-shapes are bent before polyester coating. 

• Mesh sizes: 200 x 50 mm 
• Wire diameter: 
  • Galvanized horizontal and vertical core wire: Ø 3.80 mm
  • Polyester coated horizontal and vertical wire: Ø 4.00 mm

COATING TECHNIQUE AND COLOURS

Metallic coating: the wires are galvanized and the min. zinc weight of the horizontal and vertical wires is minimum 30 g/m²

Polyester coating: 
► Thickness polyester coating:
The total layer is a minimum 100 µm thick. The polyester thickness - as well as the coated wire diameter dimension - is the average of 10 measurements done over 1 panel. 
In corrosive environments, higher minimum coating thickness is recommended. The typical value is 150 µm (always in an agreement between buyer and seller). 

► Adhesion polyester coating:
Make a scratch in the longitudinal direction of the wire, by means of a hard metal pointed graving tool, penetrating through the metal. The length of the scratch will be about 50 mm. The coating shall not be able to be lifted from the metal by more than 50 mm. 

Available colors from stock

Green RAL 6005 - Anthracite RAL 7016 - Black RAL 9005
Other colors possible on request for large quantities