Raised floor supports from 35 to 130 mm Martinetto

The MARTINETTO raised floor supports are part of Pedestal Line, a global benchmark in the outdoor raised flooring sector. The wide range of fixed supports and self-levelling supports for outdoor flooring solves the problems of laying directly on site, facilitating it and reducing work times.

Martinetto supports provide maximum versatility, thanks to heights from 35 to 380 mm and the wide range of heads for stone and ceramic floors, and decking.

All types of Martinetto are guaranteed to bear concentrated loads of 400 kg each.The maximum load recommended on each single piece is 400 kg, from which the safety coefficient, equal to 50% of yielding or breakage resistance, has already been deducted.

As a result of its combination between the base, extensions and special heads, it’s an all-in-one product solution for installation on different types of construction sites.

A selection of as many as 8 types of heads guarantees the right solution, both for installation with tile finishes (with tabs 18mm high
and 2, 4, 6 or 10 mm thick) and with decking (flat with 120mm diameter, circular with housings for 40 or 60 mm joists, rectangular 90x120 mm or square 120x120 mm).

The Martinetto support has been designed for the installation of any type of flooring on any surface, allowing inspection of the various systems beneath, without needing to demolish anything and can also be used with EasyFlat slope correctors to eliminate slopes up to
10%.

The Martinetto raised floor supports are widely used for small and large outdoor floorings and in terraces, pool sides, walkways on roofing, walkways on hanging gardens, squares, urban spaces and gardens in general. And the compatible finishings are: ceramic tiles, natural stones, marble and granite, prefabricated concrete slabs, decking and wooden planks, decking and planks made of composite wood, all self-supporting materials thatt can withstand elevation.