EnVision Command Consoles

Envision Command Consoles feature a progressive new modular design and are available in single, double or triple tier configurations. Each tier is capable of supporting a 7-1/2" or 15" high slat-wall section with multiple mounting positions for optimal sight lines and ergonomically correct viewing angles. A variety of slat-wall accessories are also available for use with these consoles to help reduce clutter and keep the work space organized. EnVision command consoles come standard with a durable and environmentally friendly Marmoleum work surface.

Specifikation

1.GENERAL DESCRIPTION 1.1 EnVision Command Center Consoles. SeeAppendix "A, B, C and D" for typical styles and measurements. 1.2 The contractor shall supply a system capable of supporting specified electronics. 1.3 The system shall be comprised of vertical support legs with horizontal slat-wall and work surface support tray. 1.4 The system shall have a minimum 1-1/8” (29mm) thick MDF core high pressure laminate work surface. The work surface shall be not less than 22-3/4” (578mm) deep and will include Safeguard® edge covering the front edge and both sides. The back edge of the work surface shall feature a 1/4”H raised 3mm PVC edge to act as a pencil stop. Comfort Edge, Marmoleum and Endurance Plus work surface options shall also be available. 2.STANDARD 2.1 Optional rack mount turret shall comply with Electronic Industry Association (E.I.A.) specifications for rack mounting ANSI/E standard RS-310. 3.DRAWINGS 3.1 The contractor shall supply five sets of scaled drawings for each console assembly showing the location of all the specified electronics in isometric view in addition to a plan (top) and front views. 3.2 The specification of sizes and dimensions shown in the drawings shall have a tolerance of not more than +/- 0.062" (1.6mm). 4.MODULAR PRE-ENGINEERED CONSTRUCTION All components within the system shall be: 4.1 Of a pre-engineered modular construction, i.e: constructed from a series of independent sectional compartments. 4.2 Available from a pre-defined set of manufacturers model numbers. 4.3 Free from alterations to the design either prior to or following installation. The assembly of the console shall be accomplished without the need for either welding or carpentry work. 4.4 Constructed of a steel super-structure framework consisting of vertical support legs with horizontal slat-wall and work surface support tray. 5.SELF SUPPORTING SKELETON FRAMEWORK The self supporting skeleton framework shall: 5.1 Be installed at the site in advance of any external finishing panels. The framework shall be fully capable of supporting all specified electronics without the need for attachment of any external panels. 5.2 Be capable of being supplied to site in knockdown (flat packed) form and be capable of assembly without welding or carpentry work. 5.3 Include vertical support legs constructed of 16 gauge* (.060”) formed sheet metal. Horizontal slat-wall sections and work surface support tray will connect and span support legs to form a complete structure. 6.COMPONENTS 6.1 Vertical Support Legs 16 gauge (.060”) vertical support legs shall be a minimum of 5” (127mm) in width and capable of supporting fully loaded console. Support legs shall feature a front and rear anti-tip extension, grommet holes, 2-1/2” (64mm) diameter glides and removable rear access panels for cable management. 6.2 Work Surface Support Tray 14 gauge (.074”) metal horizontal support tray shall be 1-1/4” (32mm) high and available in 20-1/4” (514mm), 38-1/4” (972mm), and 62-1/4” (1581mm) widths. 6.3 Corners Corner angles will not be predefined by standard corner sections. Corner angles will be defined by the work surface and can be custom configured as needed to fit the application. 6.4 Lift-Off Cable Tray 18 gauge (.048”) 4” deep horizontal cable tray shall attach to the rear of the slat-wall, no tools required to mount. Cable tray shall feature integrated lacing loops for large cable bundles. 6.5 Slat Wall Mounting System Fully integrated clear anodized aluminum slat-wall capable of supporting a wide variety of monitor mounts and standard slat-wall accessories. The slat-wall shall be constructed of extruded 6105-T5 aluminum with a double-walled vertical column and mounting channels on the front and back of the wall. The slat wall shall consist of one or two 7-1/2” (191mm) high panels for an overall height of 7-1/2” (191mm) or 15” (381mm) and an overall depth of 1-3/16” (30mm). The channel openings shall be 1-1/2” (38mm) on enter, 3/4” (19mm) wide, 7/16” (11mm) deep on the front and 1/4” (6mm) deep on the back. Slat-wall mounting brackets allow for vertical and horizontal adjustment. 7.FINISH AND COLOR 7.1 All exterior and frame steel components shall be clear anodized or zinc oxide wash primer with a black powder coat textured finish. 8.OPTIONAL ACCESSORIES 8.1 A full range of optional accessories shall be available such as phone trays, electrical outlets, CPU mounts, rack mount turrets, monitor mounts, and LED task lighting. 9.Mounting Hardware 9.1 Mounting hardware for the specified electronics shall be available upon request. All hardware needed for assembly will be provided. 10.INSTRUCTIONS 10.1 Fully detailed assembly instructions in the English language shall be supplied with both written and pictorial descriptions for each item/model numbered component. 11.PACKAGING 11.1 Each component part number shall be independently marked and packed into double or triple ply corrugated outer cartons and shall be suitable for storage and shipping to site without damage. 12.WARRANTY 12.1 • A LIFETIME WARRANTY on all fixed steel structure frame components. • A 10 year warranty on adjustable, sliding or hinged components and laminated & Marmoleum surfaces. • A 5 year warranty on Endurance Plus and TruForm surfaces. • A 2 year warranty on all electrical components and chairs. * American Standard Wire Gauge (ASWG)

Teknisk specifikation

Unik ref.winsted_command_consoles
ProduktfamiljDesk System
ProduktgruppEnvision Command Consules
TypObjekt (enstaka objekt)
Publiceringsdatum2018-01-01
Edition nummer1
Höjd (tum)57.24
Bredd (tum)84
Djup (tum)47.24

Länkar

Produkt-urlhttp://www.winsted.com/console-products/envision/
Teknisk beskrivninghttp://www.winsted.com/files/9215/0896/1801/Winsted_Product_Brochure_-_EnVision_Single_Pages_.pdf

Relaterad

Designad iUSA
Tillverkad iUSA

Klassificering

BIMobjektkategoriMöbler - Kontorsbord & Bord
IFC klassificeringMöbler
UNSPSC namnOffice Equipment and Accessories and Supplies
UNSPSC kod44
Uniclass 2015 kodPr_40_30_25_04
Uniclass 2015 beskrivningAudio visual furniture
CSI MasterFormat 2014 Kod12 56 52
CSI MasterFormat 2014 TitelAudio-Visual Furniture
OmniClass nummer23-21 11 00
OmniClass TitelCommercial Furniture
CSI UniFormat II KodE20
CSI UniFormat II TitelFURNISHINGS

Region tillgänglighet

Europa	Asien	Nordamerika	Afrika	Sydamerika	Oceanien
Åland	Afghanistan	Amerikanska Jungruöarna	Algeriet	Argentina	Amerikanska Samoaöarna
Albanien	Armenien	Anguilla	Angola	Bolivia	Australien
Andorra	Azerbajdzjan	Antigua och Barbuda	Benin	Brasilien	Cooköarna
Belgien	Bahrain	Aruba	Botswana	Chile	Fiji
Bosnien och Hercegovina	Bangladesh	Bahamas	Burkina Faso	Colombia	Franska Polynesien
Bulgarien	Bhutan	Barbados	Burundi	Ecuador	Guam
Cypern	Brittiska territoriet i Indiska oceanen	Belize	Centralafrikanska republiken	Falklandsöarna (Islas Malvinas)	Kiribati
Danmark	Brunei	Bermuda	Demokratiska republiken Kongo	Franska Guyana	Marshallöarna
Estland	Filippinerna	British Virgin Islands	Djibouti	Guyana	Mikronesiens federerade stater
Färöarna	Förenade Arabemiraten	Caymanöarna	Egypten	Paraguay	Nauru
Finland	Georgia	Costa Rica	Ekvatorialguinea	Peru	Niue
Frankrike	Hongkong	Curaçao	Elfenbenskusten	Surinam	Nordmarianerna
Gibraltar	Indien	Dominica	Eritrea	Uruguay	Norfolk Island
Grekland	Indonesien	Dominikanska republiken	Etiopien	Venezuela	Nya Kaledonien
Guernsey	Irak	El Salvador	Gabon		Nya Zeeland
Irland	Iran	Grenada	Gambia		Östtimor
Island	Israel	Grönland	Ghana		Palau
Isle of Man	Japan	Guadeloupe	Guinea		Papua Nya Guinea
Italien	Jordanien	Guatemala	Guinea-Bissau		Pitcairn Islands
Jersey	Julöarna	Haiti	Jamhuri ya Uganda		Samoa
Kroatien	Kambodja	Honduras	Kamerun		Solomon Islands
Lettland	Kazakstan	Jamaica	Kap Verde		Tokelauöarna
Liechtenstein	Kina	Kanada	Kenya		Tonga
Litauen	Kokosöarna	Karibiska Nederländerna	Komorerna		Tuvalu
Luxemburg	Kuwait	Kuba	Kongo		United States Minor Outlying Islands
Malta	Kyrgyzstan	Martinique	Lesotho		Vanuatu
Moldavien	Laos	Mexiko	Liberia		Wallis- och Futunaöarna
Monaco	Libanon	Montserrat	Libyen
Montenegro	Macao	Nicaragua	Madagaskar
Nederländerna	Malaysia	Panama	Malawi
Nordmakedonien	Maldiverna	Puerto Rico	Mali
Norge	Mongoliet	Saint Christopher och Nevis	Marocko
Österrike	Myanmar (Burma)	Saint Lucia	Mauretanien
Polen	Nepal	Saint Vincent och Grenadinerna	Mauritius
Portugal	Nordkorea	Saint-Barthélemy	Mayotte
Rumänien	Oman	Saint-Martin	Moçambique
Ryssland	Pakistan	Saint-Pierre-et-Miquelon	Namibia
San Marino	Palestina	Sint Maarten	Niger
Schweiz	Qatar	Trinidad och Tobago	Nigeria
Serbien	Saudiarabien	Turks och Caicos Islands	Réunion
Slovakien	Singapore	USA	Rwanda
Slovenien	Sri Lanka		Saint Helena
Spanien	Sydkorea		São Tomé och Príncipe
Storbritannien	Syrien		Senegal
Svalbard	Tadzjikistan		Seychellerna
Sverige	Taiwan		Sierra Leone
Tjeckien	Thailand		Södra Sudan
Tyskland	Turkiet		Somalia
Ukraina	Turkmenistan		Sudan
Ungern	Uzbekistan		Swaziland
Vatikanstaten	Vietnam		Sydafrika
Vitryssland	Yemen		Tanzania
			Tchad
			Togo
			Tunisien
			Västsahara
			Zambia
			Zimbabwe