CD60GS (GENSET) Damper

Name: CD60GS (GENSET) Damper
Rating: 4.2 (5 reviews)

4.2(5 omdömen)

High-performance Galvanized Steel Airfoil Blade Damper AMCA Class IA Leakage Rated (GENSET)

The CD60GS is designed to provide maximum combustion air and pressure relief quickly for emergency generator start up to avoid damage of equipment orsurrounding space. The factory mounted fast-acting 8-second spring open actuatorprovides optimal performance and reliability. The CD60GS also provides AMCA class 1A leakage rating of 3cfm/ft2 at 1” w.g. when blades are closed to meet requirements of the International Energy Conservation Code (IECC).

Specifikation

Furnish and install, at locations shown on plans, low leakage airfoil control dampers meeting the following minimum construction standards. Control dampers shall be produced in an ISO9001 certified factory. Frame shall be one-piece uniframe construction of 16 ga. (1.6) galvanized steel roll formed hat channel structurally equivalent to a minimum 13 ga. (2.4) frame. Blades shall be 14 ga. (2.0) equivalent galvanized steel, rollformed airfoil type for low pressure drop and low noise generation. Blade edge seals shall be Santoprene TPV type or equivalent mechanically locked into the blade edge.
Adhesive or clip-on type seals are unacceptable. Jamb seals shall be stainless steel chambered compression type to prevent leakage between blade end and damper frame. Blade end overlapping frame is unacceptable. Multiple section dampers must have factory installed jackshafts unless clearly eliminated by engineer. Bearings shall be 304 stainless steel, oil impregnated, and self-lubricating sleeve type with a 450 pound (204 kg) minimum radial crush load. Bearings shall turn in extruded holes in the damper frame. Axles shall be hexagonal positively locked into the damper blade.
Linkage shall be concealed out of airstream, within the damper frame to reduce pressure drop and noise. Temperature limits shall be -72°(-58°C) to +275°F (+135°C). Submittal must include leakage, maximum air flow and maximum pressure ratings based on AMCA Publication 500. Damper shall be tested and licensed in accordance with AMCA 511 for Air Performance and Air Leakage. Damper widths from 12” to 48” (305 to 1219) wide shall not leak any greater than 3 cfm/sq.ft. at 1” w.g. (15.2 l/s-m2
at .25 kPa). Damper shall be factory equipped with fast acting 8-second spring return electric actuator with 40,000 open/closed cycle testing, and shall be equivalent in all respects to Ruskin Model CD60GS.

Teknisk specifikation

Unik ref.CD60GS
ProduktfamiljDampers for Air Ductwork
ProduktgruppCommercial Control Dampers
TypObjekt (enstaka objekt)
Publiceringsdatum2022-07-28
Edition nummer1

Länkar

Produkt-urlhttps://www.ruskin.com/model/cd60gs-genset
Teknisk beskrivninghttps://www.ruskin.com/doc/Id/9866
Anbudsinformationhttps://www.ruskin.com/doc/Id/10091

Relaterad

HuvudmaterialGalvaniserat stål
Designad iUSA
Tillverkad iUSA

Klassificering

BIMobjektkategoriVVS - Kanalsystem
IFC klassificeringSpjäll
UNSPSC namnVentilation dampers
UNSPSC kod40101504
Uniclass 2015 kodPr_65_65_24
Uniclass 2015 beskrivningDuct dampers
CSI MasterFormat 2014 Kod23 09 13.43
CSI MasterFormat 2014 TitelControl Dampers
OmniClass nummer23-33 29 00
OmniClass TitelHVAC Dampers
CSI UniFormat II KodD3090
CSI UniFormat II TitelOther HVAC Systems & Equipment

Region tillgänglighet

Europa	Asien	Nordamerika	Afrika	Sydamerika	Oceanien
Åland	Afghanistan	Amerikanska Jungruöarna	Algeriet	Argentina	Amerikanska Samoaöarna
Albanien	Armenien	Anguilla	Angola	Bolivia	Australien
Andorra	Azerbajdzjan	Antigua och Barbuda	Benin	Brasilien	Cooköarna
Belgien	Bahrain	Aruba	Botswana	Chile	Fiji
Bosnien och Hercegovina	Bangladesh	Bahamas	Burkina Faso	Colombia	Franska Polynesien
Bulgarien	Bhutan	Barbados	Burundi	Ecuador	Guam
Cypern	Brittiska territoriet i Indiska oceanen	Belize	Centralafrikanska republiken	Falklandsöarna (Islas Malvinas)	Kiribati
Danmark	Brunei	Bermuda	Demokratiska republiken Kongo	Franska Guyana	Marshallöarna
Estland	Filippinerna	British Virgin Islands	Djibouti	Guyana	Mikronesiens federerade stater
Färöarna	Förenade Arabemiraten	Caymanöarna	Egypten	Paraguay	Nauru
Finland	Georgia	Costa Rica	Ekvatorialguinea	Peru	Niue
Frankrike	Hongkong	Curaçao	Elfenbenskusten	Surinam	Nordmarianerna
Gibraltar	Indien	Dominica	Eritrea	Uruguay	Norfolk Island
Grekland	Indonesien	Dominikanska republiken	Etiopien	Venezuela	Nya Kaledonien
Guernsey	Irak	El Salvador	Gabon		Nya Zeeland
Irland	Iran	Grenada	Gambia		Östtimor
Island	Israel	Grönland	Ghana		Palau
Isle of Man	Japan	Guadeloupe	Guinea		Papua Nya Guinea
Italien	Jordanien	Guatemala	Guinea-Bissau		Pitcairn Islands
Jersey	Julöarna	Haiti	Jamhuri ya Uganda		Samoa
Kroatien	Kambodja	Honduras	Kamerun		Solomon Islands
Lettland	Kazakstan	Jamaica	Kap Verde		Tokelauöarna
Liechtenstein	Kina	Kanada	Kenya		Tonga
Litauen	Kokosöarna	Karibiska Nederländerna	Komorerna		Tuvalu
Luxemburg	Kuwait	Kuba	Kongo		United States Minor Outlying Islands
Malta	Kyrgyzstan	Martinique	Lesotho		Vanuatu
Moldavien	Laos	Mexiko	Liberia		Wallis- och Futunaöarna
Monaco	Libanon	Montserrat	Libyen
Montenegro	Macao	Nicaragua	Madagaskar
Nederländerna	Malaysia	Panama	Malawi
Nordmakedonien	Maldiverna	Puerto Rico	Mali
Norge	Mongoliet	Saint Christopher och Nevis	Marocko
Österrike	Myanmar (Burma)	Saint Lucia	Mauretanien
Polen	Nepal	Saint Vincent och Grenadinerna	Mauritius
Portugal	Nordkorea	Saint-Barthélemy	Mayotte
Rumänien	Oman	Saint-Martin	Moçambique
Ryssland	Pakistan	Saint-Pierre-et-Miquelon	Namibia
San Marino	Palestina	Sint Maarten	Niger
Schweiz	Qatar	Trinidad och Tobago	Nigeria
Serbien	Saudiarabien	Turks och Caicos Islands	Réunion
Slovakien	Singapore	USA	Rwanda
Slovenien	Sri Lanka		Saint Helena
Spanien	Sydkorea		São Tomé och Príncipe
Storbritannien	Syrien		Senegal
Svalbard	Tadzjikistan		Seychellerna
Sverige	Taiwan		Sierra Leone
Tjeckien	Thailand		Södra Sudan
Tyskland	Turkiet		Somalia
Ukraina	Turkmenistan		Sudan
Ungern	Uzbekistan		Swaziland
Vatikanstaten	Vietnam		Sydafrika
Vitryssland	Yemen		Tanzania
			Tchad
			Togo
			Tunisien
			Västsahara
			Zambia
			Zimbabwe