Meyer Sound

Ashby Ceiling Loudspeakers

The Ashby’s dual-driver concentric configuration offers accuracy and fidelity over a full range: Experience it all, from crystal-clear speech to music’s sparkling highs and rich bass.

Features & Benefits

Self-powered
Easy to install
Extremely wide and consistent coverage
Ultra low distortion
Exceptional SPL-to-size ratio
Beautiful low frequency response and reproduction of speech and music
Supports long cable runs with light-gauge cablesOne MPS-488HP can power up to 16 Ashby-8Cs

Applications

Distributed systems for music and paging that demand high-quality audio and vocal intelligibility
Constellation acoustic systems

Specifikation

Ceiling Loudspeaker: Ashby 5C
The loudspeaker shall be self-powered and include one 5-in (127 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 5-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 100 Hz - 18 kHz; phase response, 290 Hz – 16 kHz ±45° and a conical coverage of 110 degrees. The loudspeaker shall be capable of maximum linear peak SPL of 112 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The loudspeaker shall have looping capabilities, and when connected to one channel of the required power supply up to three units can be powered. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.32 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 450 ft with 18 AWG (135 m with 1.0 mm) and the maximum cable run for three looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 7.17 in (182 mm). Grille shall be made of perforated steel and its diameter shall be 9.34 in (237.3 mm).
Dimensions shall be 8.92 in (226.5 mm) in diameter and 7.17 in (182 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 7.60 - 7.875 in (193 - 200 mm). Weight shall be 7.8 lb (3.53 kg).
The loudspeaker shall be the Meyer Sound Ashby-5C
Ceiling Loudspeaker: Ashby 8C
The loudspeaker shall be self-powered and include one 8-in (203.2 mm) diameter coaxial transducer and one 0.75-in (20 mm) dome tweeter mounted concentrically in wave guide in front of the 8-in driver.
Performance specifications for a typical production unit shall be as follows, measured at 1/3-octave resolution: operating frequency range, 60 Hz - 18 kHz; phase response, 190 Hz – 16 kHz ±45° and a conical coverage of 100 degrees.
The loudspeaker shall be capable of maximum linear peak SPL of 114 dB peak at 1 m measured using M-noise, a full-range signal developed by Meyer Sound to better model the loudspeaker’s performance with music.
The loudspeaker shall be equipped with two Phoenix 5-pin male connectors (pins 1, 2 for 48 V DC power, pins 3, 4, 5 for balanced audio). One shall be the input, the second connector shall be hard wired for looping. The audio input shall be electronically balanced with a 10 kOhm impedance and shall accept a nominal -2.5 dBV (0.25 V rms, 1 V peak) signal.
The loudspeaker shall incorporate a highly efficient Class-D power amplifier with a total output power of 220 W (440 W peak). Power requirements for the loudspeaker shall be a Meyer Sound MPS-488HP power supply, capable of delivering 48 V DC. Current draw for the loudspeaker shall be 0.16 A in idle state and its maximum long-term continuous current draw shall be 0.78 A with a duration of less than 3 s.
The loudspeaker shall tolerate voltage drops up to 30% caused by long cable runs when connected to one channel of the required power supply. Maximum cable run for a single unit is 300 ft with 18 AWG (90 m with 1.0 mm) and the maximum cable run for two looped units is 150 ft with 18 AWG (45 m with 1.0 mm).
Loudspeaker components shall be housed in a zinc-plated steel enclosure which shall also include a UL94V-0 rated baffle. The enclosure shall incorporate also 4 mounting clamps for flush-mount installations in ceilings and walls with a minimum depth of 8.87 in (225.3 mm). Grille shall be made of perforated steel and its diameter shall be 12.97 in (329.3 mm).
Dimensions shall be 12.64 in (321 mm) in diameter and 8.87 in (225.3 mm) in depth (front of ceiling surface to built-in safety attachment ring). Cutout diameter range shall be 11.32 - 11.75 in (287.6 - 298.4 mm). Weight shall be 13.8 lb (6.26 kg).
The loudspeaker shall be the Meyer Sound Ashby-8C.
Keyword: Loudspeaker, Loudspeakers, Ceiling Loudspeaker, Ceiling Loudspeakers

Teknisk specifikation

Unik ref.meyersound-ashby
ProduktfamiljLoudspeakers
ProduktgruppULTRA
TypObjekt (enstaka objekt)
Publiceringsdatum2020-03-12
Edition nummer2

Länkar

Produkt-urlhttps://meyersound.com/product/ashby/
Installationsinstruktionerhttps://meyersound.com/download/ashby-operating-instructions/?wpdmdl=10918&masterkey=59fbc40103189
Produktcertifieringhttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc
Teknisk beskrivninghttps://meyersound.com/download/ashby-8c-datasheet/?wpdmdl=32890&masterkey=5a6fcc01f21dc

Relaterad

HuvudmaterialAluminium
Designad iUSA
Tillverkad iUSA

Klassificering

BIMobjektkategoriElektronik - Ljud
IFC klassificeringObjekt
Uniclass 2015 kodPr_70_75_36_50
Uniclass 2015 beskrivningLoudspeakers
CSI MasterFormat 2014 Kod27 24 23
CSI MasterFormat 2014 TitelAudio-Video Devices
OmniClass nummer23-37 15 29 11 13
OmniClass TitelLoudspeakers

Region tillgänglighet

Europa	Asien	Nordamerika	Afrika	Sydamerika	Oceanien
Åland	Afghanistan	Amerikanska Jungruöarna	Algeriet	Argentina	Amerikanska Samoaöarna
Albanien	Armenien	Anguilla	Angola	Bolivia	Australien
Andorra	Azerbajdzjan	Antigua och Barbuda	Benin	Brasilien	Cooköarna
Belgien	Bahrain	Aruba	Botswana	Chile	Fiji
Bosnien och Hercegovina	Bangladesh	Bahamas	Burkina Faso	Colombia	Franska Polynesien
Bulgarien	Bhutan	Barbados	Burundi	Ecuador	Guam
Cypern	Brittiska territoriet i Indiska oceanen	Belize	Centralafrikanska republiken	Falklandsöarna (Islas Malvinas)	Kiribati
Danmark	Brunei	Bermuda	Demokratiska republiken Kongo	Franska Guyana	Marshallöarna
Estland	Filippinerna	British Virgin Islands	Djibouti	Guyana	Mikronesiens federerade stater
Färöarna	Förenade Arabemiraten	Caymanöarna	Egypten	Paraguay	Nauru
Finland	Georgia	Costa Rica	Ekvatorialguinea	Peru	Niue
Frankrike	Hongkong	Curaçao	Elfenbenskusten	Surinam	Nordmarianerna
Gibraltar	Indien	Dominica	Eritrea	Uruguay	Norfolk Island
Grekland	Indonesien	Dominikanska republiken	Etiopien	Venezuela	Nya Kaledonien
Guernsey	Israel	El Salvador	Gabon		Nya Zeeland
Irland	Japan	Grenada	Gambia		Östtimor
Island	Jordanien	Grönland	Ghana		Palau
Isle of Man	Julöarna	Guadeloupe	Guinea		Papua Nya Guinea
Italien	Kambodja	Guatemala	Guinea-Bissau		Pitcairn Islands
Jersey	Kazakstan	Haiti	Jamhuri ya Uganda		Samoa
Kroatien	Kina	Honduras	Kamerun		Solomon Islands
Lettland	Kokosöarna	Jamaica	Kap Verde		Tokelauöarna
Liechtenstein	Kuwait	Kanada	Kenya		Tonga
Litauen	Kyrgyzstan	Karibiska Nederländerna	Komorerna		Tuvalu
Luxemburg	Laos	Kuba	Kongo		United States Minor Outlying Islands
Malta	Libanon	Martinique	Lesotho		Vanuatu
Moldavien	Macao	Mexiko	Liberia		Wallis- och Futunaöarna
Monaco	Malaysia	Montserrat	Libyen
Montenegro	Maldiverna	Nicaragua	Madagaskar
Nederländerna	Mongoliet	Panama	Malawi
Nordmakedonien	Myanmar (Burma)	Puerto Rico	Mali
Norge	Nepal	Saint Christopher och Nevis	Marocko
Österrike	Nordkorea	Saint Lucia	Mauretanien
Polen	Oman	Saint Vincent och Grenadinerna	Mauritius
Portugal	Pakistan	Saint-Barthélemy	Mayotte
Rumänien	Palestina	Saint-Martin	Moçambique
Ryssland	Qatar	Saint-Pierre-et-Miquelon	Namibia
San Marino	Saudiarabien	Sint Maarten	Niger
Schweiz	Singapore	Trinidad och Tobago	Nigeria
Serbien	Sri Lanka	Turks och Caicos Islands	Réunion
Slovakien	Sydkorea	USA	Rwanda
Slovenien	Syrien		Saint Helena
Spanien	Tadzjikistan		São Tomé och Príncipe
Storbritannien	Taiwan		Senegal
Svalbard	Thailand		Seychellerna
Sverige	Turkiet		Sierra Leone
Tjeckien	Turkmenistan		Södra Sudan
Tyskland	Uzbekistan		Somalia
Ukraina	Vietnam		Sudan
Ungern	Yemen		Swaziland
Vatikanstaten			Sydafrika
Vitryssland			Tanzania
			Tchad
			Togo
			Tunisien
			Västsahara
			Zambia
			Zimbabwe