Bypass Terminal Unit - BP-600

The Metalaire BP-600 Bypass Air Terminals are used to achieve variable air volume delivery of conditioned air to a space or zone where constant volume air handlers exist. Variable air volume control is achieved by directing air flow either to the space or to a bypass port in direct response to a signal from the room thermostat. A locking quadrant on the inlet balancing damper determines the total air flow through the box.

Capacities ranging from 200-4,000 CFM in 6 sizes
Damper assembly includes a galvanized single ½” thick box damper providing superior rigidity and close off for accurate control without the use of internal linkage.
A constant volume of air is delivered by the air terminal, but varying amounts are delivered to the space and the bypass plenum
Pneumatic, Electric, or Analog controls available

Specifikation

- Casing constructed of 22 ga. galvanized steel
- BP-600 available in 6 unit sizes to handle 200-4,000 CFM
- Damper assembly includes a galvanized single ½” thick box damper providing superior rigidity and close off for accurate control without the use of internal linkage.
- Insulation is 1/2" thick, 1.5 lb/ft3 dual density coated fiberglass that complies with NFPA 90A, ASTM C-665, and UL-181 requirements
- Industry leading continuous welded primary inlet duct to minimize leakage with three stiffening beads for added rigidity
- Damper rotates in a self-lubricating, long life, low friction thermoplastic bearing
- Integral locking quadrant
- AHRI Certified, ETL listed, UL 1995, Complies with NFPA 90A and UL 181
- All BP-600 terminal units are AHRI certified and shipped with the AHRI seal
Liners
- ½” 1.5lbs fiberglass
- ½” 1.5lbs foil faced
- ½” Thermopure closed cell foam
Other options available:
- Hanger brackets
- Custom options