Standing Seam Roof Steel Greencoat

GreenCoat for standing seam roof is a high build polyester coated steel. The base material PLX is an extra soft tinsmith quality. The steel has practically no spring back so that tight seams can be achieved. The material can be both hand or machine seamed. The PLX is coated with 350 g zinc per m² and double side. This equals 25 micron of zinc on each side. GreenCoat is a registered trademark by SSAB and a patented concept for organic coating. The nominal thickness of the coating is 36 micron and the gloss for the matt colors is 10 and for the glossy colors 40.

Specifikation

The base material is a DX54 and the steel thickness is 0,6mm, making 1 m2 weighing approximately 4,7kg.

Teknisk specifikation

Unik ref.standing-seam-roof-steel-greencoat
ProduktfamiljStanding Seam Roof
ProduktgruppSteel
TypObjekt (enstaka objekt)
Publiceringsdatum2018-03-11
Edition nummer2

Länkar

Produkt-urlhttps://informationgateway.lindab.com/redirect/SeamlineProductInformation
Installationsinstruktionerhttps://informationgateway.lindab.com/redirect/SeamlineInstallationInstruction
Produktcertifieringhttps://informationgateway.lindab.com/redirect/SeamlineProductCertification
Teknisk beskrivninghttps://informationgateway.lindab.com/redirect/SeamlineTechnicalDescription_Greencoat

Relaterad

HuvudmaterialGalvaniserat stål
Designad iSverige
Tillverkad iSverige

Klassificering

BIMobjektkategoriKonstruktion - Tak
IFC klassificeringTak
Uniclass 2015 kodSs_30_40_50
Uniclass 2015 beskrivningMetal sheet, fully supported roof and dormer covering systems
CSI MasterFormat 2014 Kod07 61 00
CSI MasterFormat 2014 TitelSheet Metal Roofing
OmniClass nummer23-13 39 27 11 13
OmniClass TitelSheet Metal Roofing
CSI UniFormat II KodB30
CSI UniFormat II TitelROOFING