HörmannFölj

V 3009 Conveyor – Conveyor technology, flexible high-speed door

Specifikation

Specifikation

• Door leaf: Curtain made of non-transparent textile-reinforced UPVC, 1.5 mm thick. Divided into 2 or 3 sections by 2 aluminium profiles, with 750 mm vision fields made of transparent UPVC, 2 mm thick. From approx. 1300 mm above floor, bottom seal profile made of aluminium with EPDM bottom seal. Optional version without vision fields. Surface: Curtain available in the 5 standard colours based on RAL 1018 Zinc yellow, RAL 2004 Pure orange, RAL 3002 Carmine red, RAL 5010 Gentian blue, RAL 7038 Agate grey. Door guide: Self-supporting side guide rails made of canted, galvanized material. Shaft made of galvanized precision tube. Optionally side parts made of stainless steel. Door optional extras: Optional operator cover galvanized/stainless steel V2A Door operation: Direct drive operator with electromagnetic brake, integral catch safety device and digital limit switch. Motor power 0.37 – 0.45 kW, connecting voltage 400 V, 50 Hz, protection category IP 54. Operator side right/left, emergency opening via emergency crank handle. Control AK E in plastic control box, IP 54, 3-phase, 400 V, size (W x H x D) = 180 x 320 x 100 mm, inversion relay, electronic travel limit setting, Open-Stop-Close membrane push button, automatic timer and display. Connection cable with CEE plug and 2 volt-free contacts. Optional control BK 150 FU E-1 (for personnel traffic). Safeguarding via bottom seal profile with EPDM bottom seal, integrated, self-monitoring closing edge safety device and photocell for control of driveway on the side guides. Door travel speeds: Opening: approx. 0.8 m/s (relay control unit) Closing: approx. 0.8 m/s (relay control unit) Opening: approx. 1.2 m/s (frequency converter control) Closing: approx. 0.8 m/s (frequency converter control) Fitting: Professional fitting of a door including wiring as well as adjustment/alignment and test run on an existing base construction that is suitable for fitting the door. Application areas: Logistics, commercial halls, industrial halls, warehouses, internal door, equipment protection, conveyor technology, material processing, industrial doors

Teknisk specifikation

Teknisk specifikation

• Unik ref.344
• ProduktfamiljIndustrial doors
• ProduktgruppHigh-speed doors
• Publiceringsdatum2021-01-03
• Edition nummer1
• Höjd (mm)3500
• Bredd (mm)3500

Länkar

Länkar

• Produkt-urlhttps://architektenprogramm.hoermann.de/HAP/entry.php

Relaterad

Relaterad

• HuvudmaterialPVC
• Sekundärt materialAluminium
• Designad iTyskland
• Tillverkad iTyskland

Klassificering

Klassificering

• BIMobjektkategoriDörrar - industri
• IFC klassificeringDörr
• UNSPSC namnDoors
• UNSPSC kod301715
• Uniclass 2015 kodSs_25_30_20_40
• Uniclass 2015 beskrivningIndustrial doorset systems
• OmniClass nummer23-17 11 17 25 11
• OmniClass TitelRoller Shutter Overhead Plastic Doors
• CSI UniFormat II KodC1020
• CSI UniFormat II TitelInterior Doors