APU F42 sectional door

Name: APU F42 sectional door
Rating: 3.6 (8 reviews)

3.6(8 omdömen)

Hörmann sectional door APU F42 – series 60 Aluminium extrusions, extensive glazing, with uniformly divided fields, bottom sections made of double-skinned, PU-foamed steel sections with S-ribbing. With Environmental Product Declaration (EPD*) acc. to ISO 14025 and prEN 15804 *ift Rosenheim EPD-STA-0.3.2 CE mark acc. to DIN EN 13241-1 Unfinished structural opening (width x height): 1200-8000 x 1875-7000 mm Application areas: Logistics, commercial halls, industrial halls, warehouses, workshops, collective garages

Specifikation

Performance characteristics: CE mark acc. to DIN EN 13241-1 Door leaf: Glazing frames made of aluminium extrusion profiles with steel end caps, bottom section made of double-skinned PU-foamed steel section, made of hot-galvanized sheet steel. Inner and outer finger trap protection. With bottom seal, intermediate seals and lintel seal made of EPDM, depth 42 mm. Glazing frames with clear synthetic double panes, 26 mm. Optionally further infills on request. Surface: Exterior and interior of glazing frames anodised in E6/C0 DIN 17611. Exterior and interior of bottom section polyester primer-coated, coil coating based on RAL 9002 Grey white. Exterior S-ribbed, Stucco-textured with horizontal ribbing with a spacing of 125 mm, interior Stucco-textured. Optionally glazing frames and bottom section in 10 preferred colours, RAL to choose, metallic colours, British Standard or NCS colours on request. Door guide: Angle frame with side trap guard, made of hot-galvanized sheet steel, horizontal safety tracks, side seal made of EPDM. Counterbalance via torsion springs, min. 25000 door cycles (standard). Optionally stronger torsion springs (more door cycles) on request. Door operation: Operator WA 400 with control A445. Optionally further model variants (operators/controls) on request. Fitting: Professional fitting of a door including wiring as well as adjustment/alignment and test run on an existing base construction that is suitable for fitting the door. Note: The floor in the area of the door opening must be horizontal across the entire door width. The exterior floor should be inclined away from the door directly in front of the door curtain. Application areas: Logistics, commercial halls, industrial halls, warehouses, workshops, collective garages

Teknisk specifikation

Unik ref.331
ProduktfamiljIndustrial doors
ProduktgruppSectional doors
Publiceringsdatum2021-01-01
Edition nummer1
Höjd (mm)7000
Bredd (mm)8000

Länkar

Produkt-urlhttps://architektenprogramm.hoermann.de/HAP/entry.php

Relaterad

HuvudmaterialAluminium
Sekundärt materialPolyuretan
Designad iTyskland
Tillverkad iTyskland

Klassificering

BIMobjektkategoriDörrar - industri
IFC klassificeringDörr
UNSPSC namnDoors
UNSPSC kod301715
Uniclass 2015 kodPr_30_59_24_75
Uniclass 2015 beskrivningSectional overhead doorsets
CSI MasterFormat 2014 Kod08 36 13
CSI MasterFormat 2014 TitelSectional Doors
OmniClass nummer23-17 11 13
OmniClass TitelMetal Doors
CSI UniFormat II KodB2030
CSI UniFormat II TitelExterior Doors

Region tillgänglighet

Europa	Asien	Nordamerika	Afrika	Sydamerika	Oceanien
Åland	Afghanistan	Amerikanska Jungruöarna	Algeriet	Argentina	Amerikanska Samoaöarna
Albanien	Armenien	Anguilla	Angola	Bolivia	Australien
Andorra	Azerbajdzjan	Antigua och Barbuda	Benin	Brasilien	Cooköarna
Belgien	Bahrain	Aruba	Botswana	Chile	Fiji
Bosnien och Hercegovina	Bangladesh	Bahamas	Burkina Faso	Colombia	Franska Polynesien
Bulgarien	Bhutan	Barbados	Burundi	Ecuador	Guam
Cypern	Brittiska territoriet i Indiska oceanen	Belize	Centralafrikanska republiken	Falklandsöarna (Islas Malvinas)	Kiribati
Danmark	Brunei	Bermuda	Demokratiska republiken Kongo	Franska Guyana	Marshallöarna
Estland	Filippinerna	British Virgin Islands	Djibouti	Guyana	Mikronesiens federerade stater
Färöarna	Förenade Arabemiraten	Caymanöarna	Egypten	Paraguay	Nauru
Finland	Georgia	Costa Rica	Ekvatorialguinea	Peru	Niue
Frankrike	Hongkong	Curaçao	Elfenbenskusten	Surinam	Nordmarianerna
Gibraltar	Indien	Dominica	Eritrea	Uruguay	Norfolk Island
Grekland	Indonesien	Dominikanska republiken	Etiopien	Venezuela	Nya Kaledonien
Guernsey	Irak	El Salvador	Gabon		Nya Zeeland
Irland	Iran	Grenada	Gambia		Östtimor
Island	Israel	Grönland	Ghana		Palau
Isle of Man	Japan	Guadeloupe	Guinea		Papua Nya Guinea
Italien	Jordanien	Guatemala	Guinea-Bissau		Pitcairn Islands
Jersey	Julöarna	Haiti	Jamhuri ya Uganda		Samoa
Kroatien	Kambodja	Honduras	Kamerun		Solomon Islands
Lettland	Kazakstan	Jamaica	Kap Verde		Tokelauöarna
Liechtenstein	Kina	Kanada	Kenya		Tonga
Litauen	Kokosöarna	Karibiska Nederländerna	Komorerna		Tuvalu
Luxemburg	Kuwait	Kuba	Kongo		United States Minor Outlying Islands
Malta	Kyrgyzstan	Martinique	Lesotho		Vanuatu
Moldavien	Laos	Mexiko	Liberia		Wallis- och Futunaöarna
Monaco	Libanon	Montserrat	Libyen
Montenegro	Macao	Nicaragua	Madagaskar
Nederländerna	Malaysia	Panama	Malawi
Nordmakedonien	Maldiverna	Puerto Rico	Mali
Norge	Mongoliet	Saint Christopher och Nevis	Marocko
Österrike	Myanmar (Burma)	Saint Lucia	Mauretanien
Polen	Nepal	Saint Vincent och Grenadinerna	Mauritius
Portugal	Nordkorea	Saint-Barthélemy	Mayotte
Rumänien	Oman	Saint-Martin	Moçambique
Ryssland	Pakistan	Saint-Pierre-et-Miquelon	Namibia
San Marino	Palestina	Sint Maarten	Niger
Schweiz	Qatar	Trinidad och Tobago	Nigeria
Serbien	Saudiarabien	Turks och Caicos Islands	Réunion
Slovakien	Singapore	USA	Rwanda
Slovenien	Sri Lanka		Saint Helena
Spanien	Sydkorea		São Tomé och Príncipe
Storbritannien	Syrien		Senegal
Svalbard	Tadzjikistan		Seychellerna
Sverige	Taiwan		Sierra Leone
Tjeckien	Thailand		Södra Sudan
Tyskland	Turkiet		Somalia
Ukraina	Turkmenistan		Sudan
Ungern	Uzbekistan		Swaziland
Vatikanstaten	Vietnam		Sydafrika
Vitryssland	Yemen		Tanzania
			Tchad
			Togo
			Tunisien
			Västsahara
			Zambia
			Zimbabwe