ARDEX VB 100™ Fast-Track, One Component Moisture Vapor Barrier

ARDEX VB 100™ is a ready-to-use, one-component, water-based, two-coat system formulated to suppress excessive moisture in concrete.

Key Features

Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
For RH readings up to 100%
For absorbent concrete
No minimum profile required
No priming required prior to installation of ARDEX underlayments
Fast drying – install ARDEX underlayments in as little as 60 minutes after applying the second coat
One-component system
Ready for use*, resealable and reusable
Easy to use and apply
Water-based, Zero VOC
ASTM E96 < .1 perms

*As some settling can occur, stir the ARDEX VB 100 with a wooden paint stirrer or similar prior to use to ensure that all components that have settled are in full suspension. DO NOT MECHANICALLY MIX. DO NOT ADD WATER OR OTHER ADDITIVES!

Specifikation

Installation
Coverage: Approx. 1125 sq. ft. (27.6 sq. m) per unit at 2 coats
Approx. 225 sq. ft. per gal. (5.5 sq. m per L) at 2 coats (Will vary with concrete surface profile, porosity and texture)
Performance
Effect of 14 pH Solution (ASTM D1308): No effect
Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
Install Underlayment: 1 – 24 hours
VOC: 0 g/L
Packaging: One 5 gal. (19 L) pail
Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
Shelf Life: 1 year, if unopened
Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.
Warranty: ARDEX L.P. Standard Limited Warranty applies.
Extended system warranty is available. Please note that training by the ARDEX Technical Service Department is required for extended warranty eligibility. Please contact the ARDEX Technical Service Department for details.

Teknisk specifikation

Unik ref.Ardex-vb-100
ProduktfamiljMoisture Control System
ProduktgruppOne Component Moisture Control System
TypObjekt (enstaka objekt)
Publiceringsdatum2024-02-21
Edition nummer1

Länkar

Produkt-urlhttps://www.ardexamericas.com/product/ardex-vb-100/
Teknisk beskrivninghttps://ardexamericas2.wpenginepowered.com/wp-content/uploads/2022/12/ARDEX-VB-100-Technical-Data.pdf

Relaterad

HuvudmaterialPolymer-modified cementitious

Klassificering

BIMobjektkategoriGolv - Beläggningar
IFC klassificeringFloor
UNSPSC namnFlooring
UNSPSC kod301617
Uniclass 2015 kodEF_30_20
Uniclass 2015 beskrivningFloors
CSI MasterFormat 2014 Kod09 60 00
CSI MasterFormat 2014 TitelFlooring
OmniClass nummer23-15 17 11
OmniClass TitelFlooring Specialties and Accessories
CSI UniFormat II KodC3020
CSI UniFormat II TitelFloor Finishes

Region tillgänglighet

Nordamerika
Amerikanska Jungruöarna
Anguilla
Antigua och Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
British Virgin Islands
Caymanöarna
Costa Rica
Curaçao
Dominica
Dominikanska republiken
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kanada
Karibiska Nederländerna
Kuba
Martinique
Mexiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Christopher och Nevis
Saint Lucia
Saint Vincent och Grenadinerna
Saint-Barthélemy
Saint-Martin
Saint-Pierre-et-Miquelon
Sint Maarten
Trinidad och Tobago
Turks och Caicos Islands
USA