DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays
DEFEM HDG - Mesh Trays

    DEFEM HDG - Mesh Trays

    Defem Mesh Tray - Flexible mesh tray system for the routing of power, data and control cables. C3 Hot-dip galvanized Indoor- and outdoor environments: Urban and light industrial areas, breweries, dairies, laundries etc. – Average environmental corrosion. – Areas with average levels of humidity and some airborne pollution caused by production processes. – Atmospheres containing some salt or average levels of airborne pollution. – EN-ISO1461:2009 C4 Hot-dip galvanized Indoor- and outdoor environments: Chemical plants, industrial and coastal areas, swimming pools, farms, dockyards etc. – High environmental corrosion. – Areas with high levels of humidity and considerable airborne pollution. – Atmospheres with average salt content or discernible levels of airborne pollution. – EN-ISO1461:2009.
    Specifikim
    • Defem is a complete cable support system for the routing of power, data and control cables. Three finishes are available; electro-zinc, hot-dip galvanized and AISI316L acid-proof stainless steel. The standard mesh trays are available in four heights (45, 55, 60 and 110 mm) and eight widths (53, 75, 120, 220, 320, 422, 522 and 622 mm). The standard length is 2.5 m. For specific applications the range also includes specially shaped C-, G- and Z-mesh trays plus three different shapes of mini mesh trays. There is a complete range of supports for wall-mounted, floor-laid, ceiling-suspended and U-bar supported installations. Accessories such as bends, raisers, reducers, etc. are formed on site from length material elements. Thanks to the uniquely shaped well-rounded wire ends, the mesh trays comply with all safety requirements for installers and cables. In addition, the wire diameter design and size allow higher safety working-load values in comparison to any other product in the market. Standards IEC 61537, UNE EN 50102, UNE EN ISO 9227, DIN 4102-12 for fire resistance E90 Materials Electro-zinc, Hot-dip galvanized, AISI316L acid-proof stainless steel
    Specifikime teknike
    • Referencë unikeCMS-DEFEM-HDG
    • Familja e produkteveCable Trays
    • Grupi i produkteveHot Dip Galvanized solution
    • LlojiObjekt (një objekt të vetëm)
    • Data e botimit2022-02-14
    • Numri i botimit1
    Lidhje
    Të ngjashme
    • Materiali kryesorÇelik
    • Materiali dytësorÇelik
    • Projektuar nëSuedi
    • Prodhuar nëSuedi
    Klasifikimi
    • Kategoria BIMobjectElektrike - Shpërndarje
    • IFC classificationMontimi i kabllos
    • Emrin UNSPSCCable accessories
    • UNSPSC code26121630
    • Uniclass 2015 CodePr_65_70_11_17
    • Uniclass 2015 PërshkrimCable trays
    • CSI MasterFormat 2014 Code26 05 36
    • CSI MasterFormat 2014 TitleCable Trays for Electrical Systems
    • OmniClass Number23-35 33 19
    • OmniClass TitleElectrical Cable Trays
    • CSI UniFormat II CodeD5010
    • CSI UniFormat II TitleElectrical Service and Distribution

    Rajoni i disponueshëm

    Europe
    Åland Islands
    Andorra
    Austri
    Belgjikë
    Bjellorusi
    Bosnjë dhe Hercegovinë
    Bulgari
    Danimarkë
    Estoni
    Finlandë
    Francë
    Gërnzi
    Gjermani
    Gjibraltar
    Greqi
    Holandë
    Hungari
    Irlandë
    Ishujt Faroe
    Ishulli i Njeriut
    Islandë
    Itali
    Jersey
    Kroacia
    Letoni
    Liechtenstein
    Lituani
    Luksemburg
    Mali i Zi
    Maltë
    Maqedonia e Veriut
    Mbretëria e Bashkuar
    Moldovë
    Monaco
    Norvegji
    Poloni
    Portugali
    Qipro
    Qyteti i Vatikanit
    Republika Çeke
    Rumani
    Rusi
    San Marino
    Serbia
    Shqipëri
    Sllovenia
    Slovakia
    Spanjë
    Suedi
    Svalbard dhe Jan Mayen
    Switzerland
    Ukrainë