5.2.2 SPECIAL SYSTEMS - Shaft wall + studs wall lining

5.2.2 SPECIAL SYSTEMS - Shaft wall + studs wall lining

Partition consisting of a frame made from 90-mm wide, 0.7-mm thick galvanised steel plate profiles, with Pladur® CH-90 studs and Pladur® E-90 studs (vertical elements), spaced 600 mm on centre, and Pladur® J-92 channels (horizontal elements). On the inaccessible (hollow area) a partition side is created by fitting a 25-mm thick Pladur® CH board with E-90 first and last studs and CH-90 studs in between, having a continuous band of Pladur® intumescent acoustic sealant between both materials. Three 15-mm thick Pladur® F boards, including joint treatment, are screwed to the accessible side of the partition. Next, on the accessible side, an independent wall lining is installed, consisting of a structure of profiles of galvanized steel sheet metal on Pladur® studs and channels (horizontal elements), on whose interior side, depending on the height to be covered, the studs must be braced with angular pieces that are attached to the core of the studs and the Pladur® CH partition, leaving a minimum space of 10 mm between the frame and the partition. On the exterior side of this structure one or more Pladur® (N, I or H1) plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc., with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), except on the inaccessible side of the system. Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Specifikim

Wall for all kinds of shafts, when high fire protection and/or acoustic insulation is required, or when difficult access means the shafts must be installed from the outside only.

Specifikime teknike

Referencë unikepladur_5_se_5_22
Familja e produkteve5. Sistemas especiales PLADUR®
Grupi i produkteve5.2. Tabiques CH
LlojiObjekt (një objekt të vetëm)
Data e botimit2017-06-22
Numri i botimit1

Lidhje

Product URLhttps://sistemasselector.etexgroup.com/selectorf2/sistemas/sistemas-especiales.aspx
Udhezime instalimihttps://corporativo.pladur.com/-/dam/manual-tecnico-es-pladur.pdf/pi99466/original/manual-tecnico-es-pladur.pdf?v=-1514606774
Video udhëzuesehttps://www.youtube.com/user/CanalPladur
Përshkrimet teknikehttps://corporate.pladur.com/en/systems-category/special-systems-pladur/

Të ngjashme

Materiali kryesorGypsum
Materiali dytësorSuva
Projektuar nëSpanjë
Prodhuar nëSpanjë

Klasifikimi

Kategoria BIMobjectMuret - Muret e brendshme
IFC classificationMur
Emrin UNSPSCGypsum board
UNSPSC code30161509
Uniclass 2015 CodeSs_25_10_30_35
Uniclass 2015 PërshkrimGypsum board partition systems
CSI MasterFormat 2014 Code09 21 16.33
CSI MasterFormat 2014 TitleGypsum Board Area Separation Wall Assemblies
OmniClass Number23-15 11 11 11
OmniClass TitleGypsum Board Fixed Partitions
CSI UniFormat II CodeC1010
CSI UniFormat II TitlePartitions

Rajoni i disponueshëm

Europe	Asia	North America	Africa	South America	Oceania
Åland Islands	Afganistan	Anguilla	Afrika e Jugut	Argjentinë	Australi
Andorra	Arabia Saudite	Antigua dhe Barbuda	Algjeri	Bolivi	Fiji
Austri	Armeni	Aruba	Angolë	Brazil	Guam
Belgjikë	Azerbaixhan	Bahamas	Benin	Ekuador	Ishujt Cook
Bjellorusi	Bahrain	Barbados	Botsvanë	Guiana franceze	Ishujt Marshall
Bosnjë dhe Hercegovinë	Bangladesh	Belize	Burkina Faso	Guyana	Ishujt Minor Periferik të Shteteve të Bashkuara
Bulgari	Brunei	Bermuda	Burundi	Ishujt Falkland (Islas Malvinas)	Ishujt Pitcairn
Danimarkë	Butan	Dominica	Çad	Kili	Ishujt Solomon
Estoni	Emiratet e Bashkuara Arabe	El Salvador	Cape Verde	Kolumbi	Ishujt Veriore të Marianës
Finlandë	Filipinet	Grenada	Côte d'Ivoire	Paraguaj	Kaledonia e Re
Gërnzi	Gjeorgji	Grenlandë	Djibouti	Peru	Kiribati
Gjermani	Hong Kong	Guadeloupe	Egjipt	Suriname	Nauru
Gjibraltar	Indi	Guatemala	Eritrea	Uruguay	Niue
Greqi	Indonezi	Haiti	Eswatini	Venezuela	Norfolk Island
Holandë	Irak	Honduras	Ethiopia		Palau
Hungari	Iran	Ishujt e Virgjër Britanikë	Gabon		Papua Guinea e Re
Irlandë	Ishujt Cocos (Keeling)	Ishujt e Virgjër të SHBA	Gambia		Polinezia franceze
Ishujt Faroe	Izrael	Ishujt Kajman	Gana		Samoa
Ishulli i Njeriut	Japoni	Kanadë	Guine		Samoa amerikane
Islandë	Jemen	Karaibe Holandë	Guinea Ekuatoriale		Shtetet Federale të Mikronezisë
Itali	Jordan	Kolektiviteti i Shën Martinit	Guinea-Bissau		Timor-Leste
Jersey	Kamboxhi	Kosta Rika	Kamerun		Tokelau
Kroacia	Kazahstan	Kubë	Kenya		Tonga
Letoni	Kinë	Kuraçao	Komora		Tuvalu
Liechtenstein	Kirgistan	Martinique	Lesoto		Vanuatu
Lituani	Korea e jugut	Meksikë	Liberi		Wallis dhe Futuna
Luksemburg	Korea e Veriut	Montserrat	Libi		Zelanda e Re
Mali i Zi	Krishtlindje Island	Nikaragua	Madagaskar
Maltë	Kuveit	Panama	Malawi
Maqedonia e Veriut	Laos	Porto Riko	Mali
Mbretëria e Bashkuar	Liban	Republika Domenikane	Marok
Moldovë	Macau	Saint-Barthélemy	Mauritius
Monaco	Malazi	Shën Kitts dhe Nevis	Mavritani
Norvegji	Maldives	Shën Lucia	Mayotte
Poloni	Mongoli	Shën Pierre dhe Miquelon	Mozambik
Portugali	Myanmar (Burma)	Shën Vincent dhe Grenadinet	Namibia
Qipro	Neoal	Shtetet e Bashkuara	Niger
Qyteti i Vatikanit	Oman	Sint Maarten	Nigeri
Republika Çeke	Pakistan	Trinidad dhe Tobago	Republika Demokratike e Kongos
Rumani	Palestinë	Turks dhe Caicos Islands	Republika e Afrikës Qendrore
Rusi	Qatar	Xhamaika	Republika e Kongos
San Marino	Singapore		Reunion
Serbia	Siria		Rwanda
Shqipëri	Sri Lanka		Sahara Perëndimore
Sllovenia	Taiwan		São Tomé dhe Príncipe
Slovakia	Tajlandë		Senegal
Spanjë	Taxhikistan		Seychelles
Suedi	Territori Britanik i Oqeanit Indian		Shën Helena
Svalbard dhe Jan Mayen	Turkmenistan		Sierra Leone
Switzerland	Turqi		Somalia
Ukrainë	Uzbekistan		Sudan
	Vietnam		Sudanin Jugor
			Tanzania
			Togo
			Tunizi
			Uganda
			Zambia
			Zimbabwe