Geofor - Overlapping prefabricated bed joint reinforcement

Geofor - Overlapping prefabricated bed joint reinforcement

Overlapping prefabricated bed joint reinforcement consisting of two parallel longitudinal wires (that are) joined by a central wire. The central wire forms a truss structure and is welded (soldered) on (in) the same plane along the inner side of the longitudinal wires. It has an innovative design that enables the (performing of the) overlap between reinforcements without the need for any further manipulation, keeping the same nominal width of the reinforcement in the overlap area. The ends of the pieces have a specific geometric plug-shaped configuration which enables the 250mm overlap to be performed without the need to cut the wires. Also, the transverse wire is crushed in said area so that minimum mortar beds can be ensured. It also has spacers on the transverse wires which permit the control of the bed joint thickness. It also includes some devices, called SAO, placed at both ends of the pieces which permit visual verification, after the execution phase, that the amounts of wall reinforcement correspond to those of the design and that the overlap length complies with the regulations.

Specifikim

Bed joint reinforcement valid for cracking control in masonry walls (made) of coated bricks, facebricks, lighweight clay blocks, hollow concrete blocks and concrete bricks. This reinforcement also permits structural use to execute cavity wall façades, self-supporting façades and ventilated façades. It is essential for the execution of any masonry wall made with GHAS SYSTEM. This system permits continuous thermal insulation and is suitable for “passive hause”.

Specifikime teknike

Referencë unikegeofor
Familja e produkteveBed Joint Reinforcement
Grupi i produkteveGeofor
LlojiObjekt (një objekt të vetëm)
Data e botimit2017-05-08
Numri i botimit1

Lidhje

Product URLhttp://www.geohidrol.com/?products=geofor%C2%AE

Të ngjashme

Materiali kryesorÇelik
Projektuar nëSpanjë
Prodhuar nëSpanjë

Klasifikimi

Kategoria BIMobjectMateriale ndërtimi - Përforcim
IFC classificationPërforcues Mesh
Emrin UNSPSCBricks
UNSPSC code301316
Uniclass 2015 CodeSs_25_13_50
Uniclass 2015 PërshkrimMasonry wall systems
CSI MasterFormat 2014 Code04 05 19.26
CSI MasterFormat 2014 TitleMasonry Reinforcing Bars
OmniClass Number23-13 21 21 11
OmniClass TitleMasonry Reinforcing
CSI UniFormat II CodeB2010
CSI UniFormat II TitleExterior Walls

Rajoni i disponueshëm

Europe
Åland Islands
Andorra
Austri
Belgjikë
Bjellorusi
Bosnjë dhe Hercegovinë
Bulgari
Danimarkë
Estoni
Finlandë
Francë
Gërnzi
Gjermani
Gjibraltar
Greqi
Holandë
Hungari
Irlandë
Ishujt Faroe
Ishulli i Njeriut
Islandë
Itali
Jersey
Kroacia
Letoni
Liechtenstein
Lituani
Luksemburg
Mali i Zi
Maltë
Maqedonia e Veriut
Mbretëria e Bashkuar
Moldovë
Monaco
Norvegji
Poloni
Portugali
Qipro
Qyteti i Vatikanit
Republika Çeke
Rumani
Rusi
San Marino
Serbia
Shqipëri
Sllovenia
Slovakia
Spanjë
Suedi
Svalbard dhe Jan Mayen
Switzerland
Ukrainë