PREPRUFE® Plus / PREPRUFE® 800PA Waterproofing System

PREPRUFE® Plus / PREPRUFE® 800PA Waterproofing System

PREPRUFE® Plus waterproof membranes are composite sheets comprising a robust virgin HDPE backing, a pressure sensitive adhesive and a trafficable weather resistant coating with dual adhesive PREPRUFE® ZipLap™ for increased security and practicability at overlap. With their Advanced Bond Technology™, the membranes develop a continuous adhesive bond to concrete poured on or against it, preventing water migration between the structure and the membrane, significantly improving protection against leaks.

Specifikim

Integrally bonded HDPE sheet waterproofing with dual adhesive laps for pre-applied waterproofing applications for installation below slab. Basis of design is PREPRUFE® 300R Plus by GCP Applied Technologies.
Membrane shall be 1.2mm thick, uniform, flexible sheets consisting of 0.8mm thick, HDPE sheet coated with a pressure-sensitive adhesive, a trafficable weather resistant coating.
The membrane shall have a kick-out roll function to facilitate ease of application and shall have no release liner to reduce the environmental impact. Continuity between adjacent sheets shall be assured with dual adhesive laps. The membrane shall form an integral and permanent bond to placed concrete to prevent water migration at the interface of the membrane and structural concrete.
The membrane shall be chemically resistant and protect the structure from salt and sulphate attack. It shall have been proven to be tested to a resist a minimum lateral water migration of 70m head of water (686kpa), at the membrane concrete interface and have a zero permeance to moisture, it will not activate prematurely due to wet conditions and is unaffected by ground settlement beneath slabs.

Specifikime teknike

Referencë unikePreprufe-Plus_Preprufe-800PA_Waterproofing_System
Familja e produkteveWaterproofing
Grupi i produkteveBelow Ground Applications
LlojiMaterial për ndërtim
Data e botimit2019-03-28
Numri i botimit1

Lidhje

Të ngjashme

Materiali kryesorPolyethylene
Projektuar nëShtetet e Bashkuara
Prodhuar nëShtetet e Bashkuara

Klasifikimi

Kategoria BIMobjectMateriale ndërtimi - Hidroizolues & Membrane
IFC classificationElement ndërtimi
Uniclass 2015 CodePr_25_57_65_60
Uniclass 2015 PërshkrimPlastics sheets

Rajoni i disponueshëm

Europe
Andorra
Austri
Belgjikë
Bjellorusi
Bosnjë dhe Hercegovinë
Bulgari
Danimarkë
Estoni
Finlandë
Gjermani
Greqi
Holandë
Hungari
Islandë
Itali
Kroacia
Letoni
Liechtenstein
Lituani
Luksemburg
Mali i Zi
Maltë
Maqedonia e Veriut
Mbretëria e Bashkuar
Moldovë
Monaco
Norvegji
Poloni
Portugali
Qipro
Qyteti i Vatikanit
Republika Çeke
Rumani
Rusi
San Marino
Serbia
Shqipëri
Sllovenia
Slovakia
Spanjë
Suedi
Switzerland
Ukrainë