VS 65/150 M

Pump for hot for water circulation in pressurised closed circuit, or open circulation type, domestic heating and air conditioning systems. Operating range: from 0,6 a 3,7 m3/h with head of up to 6 metres. Copper piping welded union connectors: Ø 22 mm Ø 28 mm. Working pressure: 10 bar (1000 kPa). Liquid temperature range: from -10 °C to +85 °C for sanitary uses, and +110 °C for other uses. To avoid the formation of calcium, do not exceed 65 °C, and include a calcium removal system when the hardness of the water exceeds 15 French degrees.

Specifikim

Pump for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type. Also suitable for solar power systems. Single body formed of the bronze hydraulic unit. Die-cast aluminium motor casing. Technopolymer impeller. Alumina driving shaft mounted on graphite brushings lubricated by the pumped liquid itself. Stainless steel protective rotor sleeve, stator sleeve and closing flange. Ceramic thrust bearing, E.P.D.M. “O” rings. The two-pole asynchronous motor with wet rotor is selfprotected for resistance. No overload protection required. Operating range: from 0.5 to 3,6 m3/h with head up to 6 metres. Liquid temperature range: from -10°C to +85°C (for sanitary use) +110°C (for others use). Pumped liquid characteristics: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max 30% glycol). Maximum working pressure 10 bar (1000 kPa). Protection level IP 44 Insulation class F Cable grommet PG 11 Installation with motor axis horizontal

Specifikime teknike

Referencë unikeVS-65-150-M
Familja e produkteveCirculators
Grupi i produkteveWet Rotor Electronic Circulators
LlojiObjekt (një objekt të vetëm)
Data e botimit2019-08-19
Numri i botimit1

Lidhje

Product URLhttps://www.dabpumps.com/en/products/circulators/wet-rotor-circulators/vs
Udhezime instalimihttps://dna.dabpumps.com/dat/Docs/DAB/EN/Cod_60161045.pdf
Përshkrimet teknikehttps://www.dabpumps.com/sites/default/files/2016-03/VS_TS_ENG.pdf

Të ngjashme

Materiali kryesorBronze
Materiali dytësorPlastik
Projektuar nëItali
Prodhuar nëItali

Klasifikimi

Kategoria BIMobjectPajisje hidraulike - Pompë
Emrin UNSPSCCirculating pumps
UNSPSC code40151504
CSI MasterFormat 2014 Code22 35 23
CSI MasterFormat 2014 TitleCirculating, Domestic Water Heat Exchangers

Rajoni i disponueshëm

Europe
Åland Islands
Andorra
Austri
Belgjikë
Bjellorusi
Bosnjë dhe Hercegovinë
Bulgari
Danimarkë
Estoni
Finlandë
Francë
Gërnzi
Gjermani
Gjibraltar
Greqi
Holandë
Hungari
Irlandë
Ishujt Faroe
Ishulli i Njeriut
Islandë
Itali
Jersey
Kroacia
Letoni
Liechtenstein
Lituani
Luksemburg
Mali i Zi
Maltë
Maqedonia e Veriut
Mbretëria e Bashkuar
Moldovë
Monaco
Norvegji
Poloni
Portugali
Qipro
Qyteti i Vatikanit
Republika Çeke
Rumani
Rusi
San Marino
Serbia
Shqipëri
Sllovenia
Slovakia
Spanjë
Suedi
Svalbard dhe Jan Mayen
Switzerland
Ukrainë