PULSAR DRY
Dab Pumps

PULSAR DRY

Pulsar Dry by DAB is a 5-inch submersible or surface multi stage impeller monoblock pump for clean water to increase water pressure, gardening and irrigation activities in residential building services. The aspiration takes place through a watertight fitting placed in the lower part. The pump can increase water pressure by taking it from rainwater collection tanks or cisterns and is also able to work on the surface. The Pulsar Dry motor is located above the hydraulic part and is cooled by the pumped liquid. The construction with robust components allows the pump to run dry for short periods. Impellers and diffusers are in technopolymer. The single-phase version includes the 15-meter power cable with power plug, the thermo-amperometric protection and the starting capacitor. The single-phase version is also available without the capacitor, this version must be combined with a control panel supplied as an accessory. Protection by the user in the three-phase version.

Specifikim
  • Flow rate maximum: From 0,9 m3/h to 7,2 m3/h
    Head: up to 88 m
    Maximum immersion depth: 20 m
    Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
    Sand quantity: 50 g/m3
    Liquid temperature range: From 0°C to +40°C
    Thread: 1" 1/4 GAS
    Pump maximum diameter: 138 mm
    Impeller/s material: Technopolymer
    Maximum number of starts: 20/h
    Protection class: IP 68
    Motor insulation class: F
    Single phase power input: 230 V 50 Hz
    Three phase power input: 3x230 V 50 Hz / 3x400 V 50 Hz
    Power cable (m) and plug: 15 m H07RN-F with power plug
    Possible type of installation: Fixed or removable, in vertical position
    Special versions on request: Different voltages and frequencies, different cable length


Specifikime teknike
  • Referencë unikepulsar-dry
  • Familja e produkteveSubmersible Pumps
  • Grupi i produkteveSubmersible Monobloc Multistage Pumps 5''
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2022-11-10
  • Numri i botimit1
Të ngjashme
  • Materiali kryesorÇelik
  • Materiali dytësorÇelik
Klasifikimi
  • Kategoria BIMobjectPajisje hidraulike - Pompë

Rajoni i disponueshëm

Europe
Åland Islands
Andorra
Austri
Belgjikë
Bjellorusi
Bosnjë dhe Hercegovinë
Bulgari
Danimarkë
Estoni
Finlandë
Francë
Gërnzi
Gjermani
Gjibraltar
Greqi
Holandë
Hungari
Irlandë
Ishujt Faroe
Ishulli i Njeriut
Islandë
Itali
Jersey
Kroacia
Letoni
Liechtenstein
Lituani
Luksemburg
Mali i Zi
Maltë
Maqedonia e Veriut
Mbretëria e Bashkuar
Moldovë
Monaco
Norvegji
Poloni
Portugali
Qipro
Qyteti i Vatikanit
Republika Çeke
Rumani
Rusi
San Marino
Serbia
Shqipëri
Sllovenia
Slovakia
Spanjë
Suedi
Svalbard dhe Jan Mayen
Switzerland
Ukrainë

Produkte të ngjashme

4.6 out of 5 stars 4.6 (16)
4.1 out of 5 stars 4.1 (12)
4.6 out of 5 stars 4.6 (5)
4.9 out of 5 stars 4.9 (21)