EVOSTA 2/SAN

APPLICATIONS Low energy consumption electronic pump for water circulation in all types of domestic heating and cooling systems. ADVANTAGES The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ≤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary. CONSTRUCTION FEATURES Cast iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection. CONTROL PANEL The settings of the EVOSTA 2 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Specifikim

TECHNICAL DATA Operating range: 0,4-3,6 m3/h with head up to 6,9 metres. Pumped liquid temperature range: from -10 °C to +110°C Working pressure: 10 bar (1000 kPa) Protection class: IPX5 Insulation class: F Installation: with horizontal motor axis Standard power input:: single-phase 1x230 V~ 50/60 Hz Pumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%).

Specifikime teknike

Referencë unikeEVOSTA-2-SAN
Familja e produkteveCirculators
Grupi i produkteveWet Rotor Electronic Circulators
LlojiObjekt (një objekt të vetëm)
Data e botimit2018-03-11
Numri i botimit1

Lidhje

Product URLhttps://www.dabpumps.com/en/products/circulators/wet-rotor-electronic-circulators/evosta-2
Udhezime instalimihttps://dabpumps.com/sites/default/files/qrcode_pdf/60187640_EVOSTA2-3-2SOL.pdf
Përshkrimet teknikehttps://www.dabpumps.com/sites/default/files/document/60187311_NEW%20EVOSTA%202-3_TS_ENG.pdf

Të ngjashme

Materiali kryesorCast iron
Materiali dytësorPlastik
Projektuar nëItali
Prodhuar nëItali

Klasifikimi

Kategoria BIMobjectPajisje hidraulike - Pompë
IFC classificationVendosja e tubit
Kodi ETIMEC010980
Emri ETIMBuilt-in circulation pump
Emrin UNSPSCCirculating pumps
UNSPSC code40151504
Uniclass 2015 CodePr_65_53
Uniclass 2015 PërshkrimPump products
CSI MasterFormat 2014 Code22 35 23
CSI MasterFormat 2014 TitleCirculating, Domestic Water Heat Exchangers
OmniClass Number23-27 17 00
OmniClass TitlePumps
CSI UniFormat II CodeD2020
CSI UniFormat II TitleDomestic Water Distribution

Rajoni i disponueshëm

Europe
Åland Islands
Andorra
Austri
Belgjikë
Bjellorusi
Bosnjë dhe Hercegovinë
Bulgari
Danimarkë
Estoni
Finlandë
Francë
Gërnzi
Gjermani
Gjibraltar
Greqi
Holandë
Hungari
Irlandë
Ishujt Faroe
Ishulli i Njeriut
Islandë
Itali
Jersey
Kroacia
Letoni
Liechtenstein
Lituani
Luksemburg
Mali i Zi
Maltë
Maqedonia e Veriut
Mbretëria e Bashkuar
Moldovë
Monaco
Norvegji
Poloni
Portugali
Qipro
Qyteti i Vatikanit
Republika Çeke
Rumani
Rusi
San Marino
Serbia
Shqipëri
Sllovenia
Slovakia
Spanjë
Suedi
Svalbard dhe Jan Mayen
Switzerland
Ukrainë